WWW.PHIHONG.COM 33.6W Power over Ethernet Adapter DC Input High Power Single Port Injector Features Compliant with the IEEE802.3at Full Protection OCP, OVP Standard Diagnostic LEDs Gigabit Compatible Non-Vented Case DC Input Voltage 36-72VDC Classification per IEEE802.3at Cisco AP1250 Full Power Support 1 Year Warranty Applications IP Telephones Security Cameras with Pan/Tilt/Zoom Wireless Network Access Points IP Print Servers Blue Tooth Access Point Safety Approvals CE Mechanical Characteristics Length: 140mm (5.51in) Height: 36mm (1.42in) Width: 65mm (2.55in) Weight: 0.2Kg (0.44lb.) Output Specifications DC Output Regulation Model Load Voltage Line Load Min. Max. 1 POE36D-1AT 56V 0A 0.60A 54-57Vdc under all conditions Notes: (1) consult factory for availability Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 5/29/2018 POE36D 1AT Characteristics WWW.PHIHONG.COM INPUT: Immunity DC Input Voltage Range ESD: EN61000-4-2. Level 3 36 to 72VDC RS: EN61000-4-3. Level 3 EFT: EN61000-4-4. Level 2 DC Input Current Surge: EN61000-4-5. Level 3 1.2A (DC) maximum for 36VDC CS: EN61000-4-6. Level 3 OUTPUT: Insulation Resistance Total Output Power Primary to Secondary: >10M OHM 33.6W at 56VDC 500VDC Primary to Field Ground: >10M OHM DC Offset 500VDC No data degradation with DC imbalance 18mA FEATURES: Cisco Efficiency No extern parts required for Legacy devices: 80% (typical) at maximum load VoIP Phones:7910, 7912, 7940, 7960 Access Points:1040, 1140, 1250, 1260, 3500 Ripple and Regulation 100mV maximum Over Voltage/Current, Short Circuit Protection Transient O/P Voltage Protection The output can be shorted permanently 60V maximum at switch on and off without damage ENVIRONMENTAL: Indicators Temperature Green LED 1: Input power ON Operation -20 to +50C Green LED 2: Valid IEEE8-2.3at load Non-operation -25 to +85C detected and connected PoE PLUS Humidity 5 to 90% Green LED 3: Valid IEEE802.3af load detected and connected EMC Complies with FCC Class B Input Connector Complies with EN55032 Class B Anytek OQ0355510000G Mate Anytek TJ0350520000G or Isolation Test TJ035152000G. Anytek is part of Giga-Way Primary to Secondary: 2121VDC for 1 Technology Corp minute, 10mA Primary to Field Ground: 2121VDC for 1 Output Connection minute, 10mA +pins 3, 6 Output to Field Ground: 2121VDC for 1 -pins 1 ,2 minute, 10mA