WWW.PHIHONG.COM 8 Port IEEE802.3at/ 16 Ports IEEE802.3af Midspans 10/100/1000 Base-T Networks Features Full Power on all Ports 10/100/1000 Base-T Compatible 2 Finger Classification Windows GUI SNMP Management Option Full Protection OTP, OCP, OVP 1U Rack Mountable (Kit Ships with Compliant with the IEEE802.3at Unit) Standard May power Cisco AP1250 on at ports SSL option with SNMPv3 (N-option) 1 using ACCY125X dongle 1-year warranty Applications VoIP Phones Security Systems Access Point IP Cameras Safety Approvals cUL/UL CE Mechanical Characteristics Length: 438mm (17.25in) Height: 44.5 mm (1.75in) Width: 228mm (8.98in) Weight: 3.8Kg (8.5lbs) Output Specifications Model Port Output Power SNMP Ports 1-8 33.6W/port POE576U-24AFAT-R No Ports 9-24 15.4W/port Ports 1-8 33.6W/port POE576U-24AFAT-N-R Yes Ports 9-24 15.4W/port Notes: 1. Effective January 1, 2019, warranty is valid for one year from purchase date. Optional extended warranties available-please consult factory for more information Reference files: 1. Phihong Midspan PoE GUI User Manual-v1.0.pdf 2. Phihong Midspan PoE GUI Installation-v1.0.exe 3. PL2303 Prolific DriverInstaller v1 12 0.zip 4. POE576U AFAT Firmware-Rev1.4.zip 5. SNMP MIB.zip 6. Multiport Midspan Installation Manual.pdf Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 3/12/2019 POE576U-24AFAT Characteristics WWW.PHIHONG.COM INPUT: ENVIRONMENTAL: Voltage Range Temperature 90 to 264VAC Operation 0 to +40C Non-operation -25 to +65C Input Frequency Humidity 5 to 90% 47-63Hz EMC Input Current EN55022 Class A, FCC Class A with UTP 9A (RMS) max for 90VAC cabling 4.5A (RMS) max for 230VAC EN55022 Class B, FCC Class B with FTP cabling Leakage Current 3.5mA max 264VAC 60Hz Isolation Test Primary to Secondary: 4242VDC for 1 minute AC Inrush Current Primary to Ground: 2121VDC for 1 minute 30A (RMS) max for 115VAC Secondary to Ground: 2121VDC for 1 minute 60A (RMS) max for 230VAC Immunity EN50082-1 OUTPUT: ESD: EN61000-4-2. Level 3 Total Output Power RS: EN61000-4-3. Level 2 Ports 1-8 at 33.6W per port EFT: EN61000-4-4. Level 2 Ports 9-24 at 15.4W per port Surge: EN61000-4-5. Level 3 Total Power 515.2W max CS: EN61000-4-6. Level 2 Voltage Dips EN61000-4-11 Ripple and Regulation Harmonic: EN61000-3-2 Class A 100mV max IEEE 802.3af&at Interoperability Efficiency If 25kohm is detected the unit operates in 75% (typical) at max load, 120VAC 60Hz IEEE802.3at mode 30W 2 pair powering. 12.5k detection resistance required for full Hold-up Time power 16mS min. 120VAC and max load UNH Interoperability report available on request Transient O/P Voltage Protection 60V maximum at switch on/off at any AC line FEATURES: Phase Cisco Legacy detection No extern parts required for Legacy devices: Turn-On Delay Time VoIP Phones: 7910, 7912, 7940, 7960 20sec max at max load, 120VAC 60Hz, 60Hz Access Points: 1040, 1140, 1260, 3500