WWW.PHIHONG.COM 8/16 Port IEEE802.3at/PoEPLUS Midspans PoE576U for 10/100/1000 Base-T Networks Features Compliant with the IEEE802.3at Standard Full Power of 576W30W per Port, 2 finger classification No Power Management required SNMP Management Option Full Protection OTP, OCP, OVP Optional SSL with SNMPv3 1U Rack Mountable (Mounting Kit Windows GUI Ships with Unit) May power Cisco AP1250 with 10/100/1000 Base-T Compatible 1 ACCY125X dongle 1-year warranty Applications VoIP Phones Security Systems Access Point IP Cameras Safety Approvals cUL/UL CE Mechanical Characteristics Length: 438mm (17.25in) Height: 44.5 mm (1.75in) Width: 228mm (8.98in) Weight: 3.8Kg (8.5lbs) Output Specifications Model Number of Ports SNMP POE576U-16AT-R 16 No POE576U-16AT-N-R 16 Yes POE576U-8AT-R 8 No POE576U-8AT-N-R 8 Yes Notes: 1. Effective January 1, 2019, warranty is valid for one year from purchase date. Optional extended warranties available-please consult factory for more information Reference files: 1. Phihong Midspan PoE GUI User Manual-v1.0.pdf 2. Phihong Midspan PoE GUI Installation-v1.0.exe 3. PL2303 Prolific DriverInstaller v1 12 0.zip 4. POE576U AT Firmware-Rev1.4.zip 5. SNMP MIB.zip 6. Multiport Midspan Installation Manual.pdf Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 3/12/2019 POE576U Characteristics WWW.PHIHONG.COM INPUT: ENVIRONMENTAL: Voltage Range Temperature 90 to 264VAC Operation 0 to +40C Non-operation -25 to +65C Input Frequency Humidity 5 to 90% 47-63Hz EMC Input Current EN55022 Class A, FCC Class A with UTP 9A (RMS) max for 90VAC cabling 4.5A (RMS) max for 230VAC EN55022 Class B, FCC Class B with FTP cabling Leakage Current 3.5mA max 264VAC 60Hz Isolation Test Primary to Secondary: 4242VDC for 1 AC Inrush Current minute 30A (RMS) max for 115VAC Primary to Ground: 2121VDC for 1 minute 60A (RMS) max for 230VAC Secondary to Ground: 2121VDC for 1 minute OUTPUT: Total Output Power Immunity EN50082-1 33.6W per port ESD: EN61000-4-2. Level 3 Total Power 269W (8 ports) -538W (16 RS: EN61000-4-3. Level 2 ports) EFT: EN61000-4-4. Level 2 Surge: EN61000-4-5. Level 3 Ripple and Regulation CS: EN61000-4-6. Level 2 100mV maximum Voltage Dips EN61000-4-11 Harmonic: EN61000-3-2 Class A Efficiency 75% (typical) at max load, 120VAC 60Hz IEEE 802.3at Interoperability UNH Interoperability report available on Hold-up Time request 16mS min. 120VAC and max load FEATURES: Transient O/P Voltage Protection Cisco Legacy detection 60V max at switch on/off at any AC line No extern parts required for Legacy devices: Phase VoIP Phones: 7910, 7912, 7940, 7960 Access Points: 1040, 1140, 1260, 3500 Turn-On Delay Time 20 sec max at max load, and 120VAC 60Hz, Over Voltage/Current, Short Circuit 60Hz Protection The output can be shorted permanently without damage