WWW.PHIHONG.COM 4-Port 95W per Port Midspan Mega Power over Ethernet Midspans Features Proprietary Detection, Disconnect and Fully Compliant Detection, Overload Protection disconnect and Voltage Control per SNMP Management IEEE802.3af Mega PoE 95W per Port Gigabit Compatible Diagnostic LEDs Full Protection OCP, OVP 1U Rack Mounting Kit Ships with Unit Limited Power Source 1 1 Year Warranty Applications Wireless Access Points Security Systems Computer Workstations IP Cameras Kiosks Magnetic Locks Safety Approvals cUL/UL CE Mechanical Characteristics Length: 438mm (17.25in) Height: 44.5mm (1.75in) Width: 228mm (8.98in) Weight: 3.8Kg (8.5lbs) Output Specifications Load DC Output 2 Model Output Power per Port 3 Voltage Min. Max. POE576U-4MP-N-R 56V 15mA 1.69A 95W Notes 1. Effective January 1, 2019, warranty is valid for one year from purchase date. Optional extended warranties available-please consult factory for more information 2. Model without SNMP management available upon special request 3. Max load applies to compliant load at 12.5K detection. If operating at 25K IEEE802.3at mode max load is 0.6A Reference files: 1. SNMPv2c User Manual-Rev1.7.pdf 2. Multiport Midspan Installation Manual.pdf 3. SNMPv2c Firmware-Rev1.7.zip 4. SNMPv2c MIB 10 30 2009.zip Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 3/12/2019 POE576U-4MPN-R Characteristics WWW.PHIHONG.COM INPUT: Input Voltage Rating ENVIRONMENTAL 100 to 240VAC Temperature Operation 0 to +40C Input Voltage Range Non-Operation -25 to +65C 90 to 264VAC Humidity AC Input Current Operation 5 to 90% 9.0A (RMS) 90VAC at maximum load Non-Operation 5 to 90% 4.25A (RMS) 230VAC at maximum load EMC AC Input Frequency EN55022 Class A, FCC Class A with UTP 47 to 63Hz cabling EN55022 Class B, FCC Class B with FTP Leakage Current cabling 3.5mA maximum at 264VAC and 60Hz Isolation Test Max In-Rush Current: Primary to Secondary: 4242VDC for 1 min 30A for 115VAC at maximum load Primary to Ground: 2121VDC for 1 min 60A for 230VAC at Maximum load Secondary to Ground: 2121VDC for 1 min (Cold Start at Ambient 25C) Immunity EN50082-1 OUTPUT: ESD: EN61000-4-2 Level 3 Total Output Power RS: EN61000-4-3 Level 2 95W per port EFP: EN61000-4-4 Level 2 380W Maximum Total Power Surge: EN61000-4-5 Level 3 CS: EN61000-4-6 Level 2 Ripple and Regulation Voltage Dips: EN61000-4-11 250mV maximum Harmonic: EN61000-3-2 Class A Efficiency IEEE802.3af/at Interoperability 75% (typical) at maximum load, and If 25K Ohm is detect the unit operates in 120VAC 60Hz IEEE802.3at mode 33.6W 2 pair powering. 12.5K detection resistance Hold-Up Time required for full power. 16mS min. 120VAC and maximum load FEATURE: Transient O/P Voltage Protection Cisco Legacy Detection 60V maximum at switch on and off at any No extern parts required for Legacy AC line Phase Devices: VoIP Phones:7910, 7912, 7940, 7960 Turn-On Delay Time Access Points350, 1100, 1200 20 sec maximum at maximum load, 120VAC 60Hz