WWW.PHIHONG.COM 8 Port Gigabit Power over Ethernet Midspan POE370U for 10/100/1000 Base-T Networks Features IEEE 802.3af Detection, Disconnect Full Power of 370W--15.4W per Port and Overload Protection No Power Management required NIC Interface (Optional) Full Protection OTP, OCP, OVP SSL Option with SNMPv3 48V RPS Input (Optional) 10/100/1000 base T Compatible Cisco Legacy Detection Limited Lifetime Warranty 1U Rack Mounting Kit Ships with Unit Applications VoIP Phones Security Systems Access Point Lighting Systems with Single UPS Safety Approvals cUL/UL SAA CE C-Tick Mechanical Characteristics Length: 438mm (17.25in) Height: 44.5 mm (1.75in) Width: 228mm (8.98in) Weight: 3.8Kg (8.5lbs) Output Specifications Model Number of Ports Maximum Output Power POE370U-480-8-R 8 125W POE370U-480-8-N-R 8 125W Notes: (1) N includes SNMP, Simple Network Management Protocol Reference Files: 1. Multiport Midspan Installation Manual.pdf 2. 19in Rack Mounting Kit Datasheet.pdf 3. SNMPv2c User Manual-Rev1.7.pdf 4. SNMPv2c Firmware-Rev1.7.zip 5. SNMPv2c MIB 10 30 2009.zip Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 12/11/2018 POE370U-480-8 Characteristics WWW.PHIHONG.COM INPUT: AC Input Voltage Range ENVIRONMENTAL: 90 to 264VAC Temperature Operation 0 to +40C AC Input Voltage Rating Non-operation -25 to +65C 100 to 240VAC Humidity 5 to 90% AC Input Current EMC 5.5A (RMS) maximum for 90VAC Complies with FCC Class B 2.75A (RMS) maximum for 240VAC Complies with EN55032 Class B Leakage Current Isolation Test 3.5mA maximum 254VAC 60Hz Primary to Secondary: 4242VDC for 1 minute AC Input Frequency Primary to Ground: 2121VDC for 1 minute 47-63Hz Secondary to Ground: 2121VDC for 1 minute AC Inrush Current 30A (RMS) maximum for 115VAC Immunity EN50082-1 60A (RMS) maximum for 230VAC ESD: EN61000-4-2. Level 3 RS: EN61000-4-3. Level 2 OUTPUT: EFT: EN61000-4-4. Level 2 Total Output Power Surge: EN61000-4-5. Level 3 15.4W per port CS: EN61000-4-6. Level 2 Voltage Dips EN61000-4-11 Ripple and Regulation Harmonic: EN61000-3-2 Class A 100mV maximum IEEE 802.3af Interoperability Efficiency UNH Interoperability report available on 75% (typical) at maximum load, and request 120VAC 60Hz FEATURES: Hold-up Time Cisco Legacy detection 16mS min. 120VAC at maximum load No extern parts required for Legacy devices: VoIP Phones: Transient O/P Voltage Protection 7910, 7912, 7940, 7960 60V maximum at switch on and off at any Access Points: AC line Phase 350, 1100, 1200 Turn-On Delay Time Over Voltage/Current, Short Circuit 3 sec maximum at maximum load, and Protection 120VAC 60Hz, 25Hz The output can be shorted permanently without damage Revision 12/11/2018