POE480U-4UP-R Phihong

WWW.PHIHONG.COM 4/8 Ports 60W per Port Midspan POE480U for 10/100/1000 Base-T Networks Features Proprietary Detection, Disconnect and 19 Rack Mounting Kit Ships with Overload Protection Unit Low Cost Full Protection OTP, OCP, OVP Gigabit Compatible 48V RPS Input (Optional) 1 No Power Management required 1-Year Warranty Full Power -- 60W per Port Applications Wireless Access Points Security Systems Computer Workstations IP Cameras Safety Approvals cUL/UL CE Mechanical Characteristics Length: 438mm (17.25in) Height: 44.5 mm (1.75in) Width: 228mm (8.98in) Weight: 1.0Kg (2.5lbs) Output Specifications Model Number of Ports POE480U-4UP-R 4 POE480U-8UP-R 8 Notes: 1. Effective January 1, 2019, warranty is valid for one year from purchase date. Optional extended warranties available-please consult factory for more information Reference files: Multiport Midspan Installation Manual.pdf Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 5/27/2020 POE480U-UP Characteristics WWW.PHIHONG.COM INPUT: Turn-On Delay Time AC Input: 10 sec max at max load, and 120VAC 60Hz, Voltage Range 25Hz 90 to 264VAC ENVIRONMENTAL: Temperature Input Frequency Operation 0 to +40C 47-63Hz Non-operation -25 to +65C Humidity 5 to 90% Input Current: 7.5A (RMS) max for 90VAC EMI 3A (RMS) max for 240VAC EN55022 Class B, FCC Class B with FTP cabling Leakage Current EN55022 Class A, FCC Class A with UTP 3.5mA max 254VAC 60Hz cabling AC Inrush Current Isolation Test 30A (RMS) max for 115VAC Primary to Secondary: 4242VDC for 1 minute DC Input (Optional) Primary to Ground: 2121VDC for 1 minute Voltage Range Secondary to Ground: 2121VDC for 1 44-57VDC. Source should be SELV and minute isolated from ground by 1500Vac Immunity EN50082-1 Input Current ESD: EN61000-4-2. Level 3 10A Max RS: EN61000-4-3. Level 2 EFT: EN61000-4-4. Level 2 OUTPUT: Surge: EN61000-4-5. Level 3 Output Power CS: EN61000-4-6. Level 2 60W per port Voltage Dips EN61000-4-11 240-480W Total Power Harmonic: EN61000-3-2 Class A Ripple and Regulation FEATURES: 100mV maximum Over Voltage/Current, Short Circuit Protection Efficiency The output can be shorted permanently 75% (typical) at max load, 120VAC 60Hz without damage. Hold-up Time Over Temperature Protection 16mS min. at max load, 120 VAC 60Hz Automatic shutdown without damage Transient O/P Voltage Protection Indicators 60V max at switch on/off at any AC line Green LED: Power detected CONNECT Phase at 60W Yellow LED: Fault detected