WWW.PHIHONG.COM 33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at -40 to +60C Temperature Range Standard Full Protection OCP, OVP Diagnostic LEDs 1 Year Warranty Gigabit Compatible Non-Vented Case with Mounting Bracket IP67 Rating (Waterproof) Extends Data to 200 meters from a Optional Cable Glands for waterproof switch operation (sold separately) SNMP Enabled for Remote access Applications Outdoor Security Cameras Outdoor Emergency Lighting Outdoor Wireless Access Points Safety Approvals CE cUL/UL Mechanical Characteristics (without Mounting Bracket) Length: 252.1mm (9.93in) Height: 78mm (3.07in) Width: 176mm (6.93in) Weight: 1.7Kg (3.75lb) Mechanical Characteristics (with Mounting Bracket) Length: 300mm (11.81in) Height: 82mm (3.23) Width: 184mm (7.24in) Weight: 2.83kg (6.24lb) Output Specifications Load Regulation DC Output Model Voltage Min. Max. Line Load POE33S-1AT-N-R 56V 0A 0.60A 54-57Vdc under all conditions Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 12/11/2018 POE33S Characteristics WWW.PHIHONG.COM INPUT: AC Input Voltage Range Isolation Test Primary to Secondary: 4242 VDC for 1 90 to 264VAC minute, 10mA Primary to Field Ground: 2121VDC for 1 AC Input Voltage Rating minute, 10mA Output to Field Ground: 2121VDC for 1 100 to 240VAC minute, 10mA AC Input Current Insulation Resistance 1.0A (RMS) and 90VAC at maximum load Primary to Secondary: >10M OHM .55A (RMS) and 240VAC at maximum load 500VDC Primary to Field Ground: >10M OHM AC Input Frequency 500VDC 47 to 63Hz Immunity Leakage Current ESD: IEC61000-4-2 Level 3 3.5mA for 254VAC, 50Hz RS: IEC61000-4-3 Level 3 EFT: IEC61000-4-4 Level 2 Max Inrush Current Surge: IEC61000-4-5 Level 3 30A for 115VAC at maximum load CS: IEC61000-4-6 Level 3 60A for 230VAC at maximum load Voltage Dips IEC61000-4-11 Harmonic: EN61000-3-2 Class A OUTPUT: Total Output Power FEATURES: 33.6W Over Voltage/Current, Short Circuit Protection Ripple and Regulation The output can be shorted permanently 250mV maximum without damage Efficiency Indicators 73% (typical) at maximum load, and Ethernet IN/OUT: 120VAC 60Hz Green LED1 and LED2 - 10Mb Activity Green LED1 100Mb Activity ENVIRONMENTAL: Green LED2 1Gb Activity Temperature Orange LED3 Link Activity Operation -40 to +60C POE: Non-operation -40 to +85C Blinking GREEN Unit is ON Active with No Load Humidity Solid GREEN Unit has detected a valid Operation 5 to 90% IEEE802.3at load Blinking RED/GREEN unit has detected EMI an invalid load Complies with FCC Class A Solid RED unit is in over-load condition Complies with EN55032 Class B