PSA05S-050QA-H Phihong

WWW.PHIHONG.COM 5W Compact Fixed Blade USB Power Adapter (Australia/New Zealand) Features Fixed Blade Low Cost Level V Efficient Low Profile No-Load Power Draw <0.3mW Halogen Free Applications Smart Phones Personal Electronics PDA Digital Camera Safety Approvals C-Tick SAA Mechanical Characteristics Length: 53.2mm (2.09in) Height: 25.0mm (0.98in) Width: 43mm (1.69in) Output Specifications (1) DC Output Load Ripple Regulation Case Model Voltage Min. Max. P-P (Max) Line Load Color PSA05S-050QA-H 5V 0A 1A 200mV 5% Black PSA05S-050QW-H 5V 0A 1A 200mV White 5% Note: (1) Measured after 10 minutes with by-pass capacitors 0.1uf // 10uf at output connector terminal and oscilloscope set at 20MHz. Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revised 1/4/2018 PSA05S Characteristics WWW.PHIHONG.COM INPUT: ENVIRONMENTAL: AC Input Voltage Rating Temperature 100 to 240VAC Operation 0 to +40C Non-operation -40 to +85C AC Input Voltage Range Humidity 90% 90 to 264VAC Immunity AC Input Current ESD: EN61000-4-2. Level 4 0.15A(RMS) max. Surge: EN61000-4-5. Level 3 Harmonic: EN61000-3-2 Leakage Current Flicker: EN61000-3-3 5A maximum Emissions Input Power Saving FCC Class B <30mW max EN55022 Class B OUTPUT: Dielectric Withstand (Hi-pot) Test Power Primary to Secondary: 3000VAC, 10mA for 1 5W Continuous minute Efficiency Insulation Resistance Meets Level V Efficiency Requirements Primary to Secondary: 10M ohm 500VDC Short Circuit Protection MTBF Output may be shorted permanently without 100K Hrs min. (MIL-HDBK-217F) at max damage load Over-voltage Protection DC Output Connector Output shall not exceed 10V USB A