PSM03A-100-R Phihong

WWW.PHIHONG.COM 2.75W Compact Fixed Blade Charger with DC Cord Features North America Fixed Blade AC Input Limited Power Source CC & CV control Class B EMI Level VI Efficiency No Y Caps Class 2 Output per UL1310 Standard Barrel Connector or Micro-B Applications MPEG Players Personal Electronics PDAs Digital Cameras Medical Test Device Charging Cordless Tools Safety Approvals cUL/UL Mechanical Characteristics Length: 39.4mm (1.65in) Height: 21.0mm (0.87in) Width: 43mm (1.65in) Weight: 45g (1.59oz) Output Specifications 1 Load Regulation DC Output Ripple Model Voltage P-P (max) Min. Max. Line Load PSM03A-050-R 5V 0A 0.55A 100mV 5% 2 PSM03A-050(M)-R 5V 0A 0.55A 100mV 5% PSM03A-075-R 7.5V 0A 0.366A 150mV 5% PSM03A-090-R 9V 0A 0.305A 120mV 5% PSM03A-120-R 12V 0A 0.229A 200mV 5% Notes: (1) Measured with by-pass capacitors 10uF electrolytic // 0.1uF ceramic capacitors across connector terminal with oscilloscope set at 20 MHz bandwidth (2) This unit is terminated with Micro-B connector in place of standard DC cable. Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revised 12/10/2018 PSM03A Characteristics WWW.PHIHONG.COM INPUT: EMI AC Input Voltage Rating Complies with FCC Class B 100 to 240VAC Complies with EN55032 Class B AC Input Voltage Range Dielectric Withstand (Hi-pot) Test 90 to 264VAC Primary to Secondary: 3000VAC, 10mA for 60s AC Input Current Insulation Resistance 100mA (RMS) max. Primary to Secondary: DC500V >7M Leakage Current FEATURES 0.25mA maximum Over-voltage Protection 10V max. Auto restart No-Load Power Saving 0.01W maximum at 115VAC Short-circuit Protection The output can be shorted without damage. OUTPUT: Power DC Cord 2.75W Maximum 1500mm Efficiency DC Output Connector DOE Level VI 5.5mm x 2.1mm x 9.5 center positive barrel (M) Model - Micro USB ENVIRONMENTAL: Pin1: +5V Temperature Pin2: Short Operation 0 to +40C Pin3: Short Non-operation -25 to +75C Pin4: N/C Humidity 10 to 90% Pin5: GND Immunity ESD: EN61000-4-2. Level 4 Surge: EN61000-4-5. Level 4 Harmonic: EN61000-3-2 Flicker: EN61000-3-3