PSM03K-050Q-H Phihong

WWW.PHIHONG.COM 2.75W Compact Fixed Blade Charger (United Kingdom) Standby Power Features Fixed Blade Low Cost CC & CV control 5 Star Standby power <0.03W Ecodesign ErP Directive 2009/125/EC No Y Cap level 2 annex 1b Compliant Halogen Free Applications MPEG Players Personal Electronics PDA Digital Camera Safety Approvals CE IEEE1725 Approved CB Mechanical Characteristics Length: 49mm (1.93in) Height: 21.0mm (0.87in) Width: 43mm (1.65in) Output Specifications (1) Ripple Regulation DC Output Load Case Color Line Load Model Voltage Min. Max. P-P (max) PSM03K-050Q 5V 0A 0.55A 100mV 5% Black PSM03K-050Q-3W 5V 0A 0.55A 100mV 5% White Note: (1) Measured after 10 minutes with by-pass capacitors 0.1uf // 10uf at output connector terminal and oscilloscope set at 20MHz. Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revised 5/25/2018 PSM03K Characteristics WWW.PHIHONG.COM INPUT: ENVIRONMENTAL: AC Input Voltage Rating Temperature 100 to 240VAC Operation 0 to +40C Non-operation -40 to +85C AC Input Voltage Range Humidity 90% 90 to 264VAC Immunity AC Input Current ESD: EN61000-4-2. Level 4 0.1A(RMS) max. Surge: EN61000-4-5. Level 4 Harmonic: EN61000-3-2 Leakage Current Flicker: EN61000-3-3 <20uA, 264VAC/63Hz Emissions Input Power Saving Complies with FCC Class B 30mW 115VAC/230VAC Complies with EN55032 Class B OUTPUT: Dielectric Withstand (Hi-pot) Test Power Primary to Secondary: 3000VAC 2.75W Maximum Insulation Resistance Efficiency Primary to Secondary: 7M ohm 500VDC Meets Level V Efficiency Requirements 63.7% minimum average efficiency DC Output Connector USB A Over-voltage Protection D+ and D- pins shorted together inside the <8.5V charger