CleO35 Module Datasheet
Version 1.0
Document Reference No.: FT_001299 C learance No.: FTDI# 493
Future Technology
Devices International
Limited
Datasheet
CleO35 Module
1.1 Features
1 Introduction
The CleO35 utilises the FTDI FT903 low power MCU to
The CleO35 is a smart TFT display shield for
bridge between the Arduino and fast interface
Arduino. It includes a 3.5 inch 320x480 pixel TFT
accessories such as camera and SD Card input. For a
LCD panel with resistive touch, PWM audio output
full list of the FT903s features please see the FT90X
with in-built speaker amplifier for better audio
datasheet .In addition, the CleO35 has the following
quality
features:
Landscape and portrait modes supported
These smart TFT display shields can be easily
In built FTDI FT810 embedded video engine
programmed by almost anyone to give
(EVE) graphic controller
professional looking HMI / GUI's with no prior
knowledge of complex graphics programming or
Anti-Aliased graphics throughout for much finer
mathematics.
image quality with nojaggie.
Ready to use LCD module with resistive touch
in panel mountable bezel.
Micro SD card socket support.
In built 8M Byte Eflash memory
USB DFU port for firmware updates
Support camera interface
PWM audio supported and in built speaker
amplifier
Designed as Arduino and NerO shield
Compatible with FTDI CleO-RIO, CleO-Camera
and CleO-Speaker.
CE and FCC certified
Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or
reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its
documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or
implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or
failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any
medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury.
This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other
intellectual property rights is implied by the publication of this document. Future Technology Devices International Ltd, Unit 1, 2
Seaward Place, C enturion Business Park, Glasgow G41 1HH United Kingdom. Scotland Registered C ompany Number: SC 136640
Copyright Future Technology Devices International Limited 1 CleO35 Module Datasheet
Version 1.0
Document Reference No.: FT_001299 C learance No.: FTDI# 493
2 Ordering Information
Part No. Description
CleO35 module, with FPC/FFC 50 LCD connector, 3.5 inch TFT LCD display
CleO35A
panel preinstalled, with resistive touch. Black bezel.
CleO-RIO1 Arduino Shield for users to stack Arduino board on bottom of CleO35.
CleO-CAM1 A camera plug-in module for CleO35.
CleO-SPK1 A speaker enclosure with connecting wires to CleO35.
3 Program Support
The demo applications are provided for CleO35 modules by FTDI. Visit FTDIs website at