PSM36W-120-TW2 Phihong

WWW.PHIHONG.COM 36 Watt Universal 2-Wire Input Adapter PSM36W Adapter Series Meets CEC and EISA Requirements Features Low Cost Non-Vented/Spill-proof Case EISA Energy Efficiency Compliance Low Profile Design Ecodesign ErP Directive 2009/125/EC Class B EMI level 2 annex 1b Compliant Level V Efficiency Compliant Applications Portable Equipment Networking Peripherals Gaming Machines Safety Approvals CE cUL/UL Mechanical Characteristics Length: 120mm (4.72in) Height: 31.5mm (1.27in) Width: 50mm (1.98in) Weight: 250g (8.82oz) Output Specifications Load Ripple Efficiency Model DC Output Voltage Min. Max. P-P (max.) Level PSM36W-120TW2-R 12V 0A 3A 140mV Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revised 11/21/2011 PSM36W-120TW2 Characteristics WWW.PHIHONG.COM Input: EMC FCC Class B AC Input Voltage Rating EN55022 Class B 120-240V AC Immunity AC Input Voltage Range IEC61000-4-2 89-270V AC IEC61000-4-3 IEC61000-4-4 AC Input Frequency IEC61000-4-5 47-63Hz IEC61000-4-6 IEC61000-4-8 Input Current IEC61000-4-11 0.8A (RMS) Maximum at 120V AC EN61000-3-2 Leakage Current Over-Voltage Protection 250uA maximum Auto-restart Inrush Current Short-Circuit Protection 60A max. at 120V AC and max load Protected against short circuit Output can be (Ambient 25C cold start shorted permanently without damage Input Power Saving Dielectric Withstand (Hi-pot) Test 0.3W maximum at 230V AC and no load Primary to Secondary: 2000V AC, 10mA for 1 minute Output: Insulation Resistance Efficiency Primary to secondary: >7M ohm 500V DC Meets Level V Efficiency Requirements 85% minimum MTBF 100,000 Hours Minimum at 25C Environmental: Temperature DC Output Connector Operation 0 to 45C Center Positive Barrel (11.2mm x 5.5mm x 2.1mm) Non-operation -40 to 80C Operating Humidity 15 to 90% DC Cord 1000mm 50 Dimension Diagram Unit: mm (inch) Type text