PSA15A-120P Phihong

WWW.PHIHONG.COM 15 Watt Fixed Wall Plug Series Adapter Meets Level VI Requirements 1 Features Limited Power Source (LPS) Class II Double Insulated Class B EMI High Efficiency Level VI Compliant Low Cost Applications Wireless Communications Portable Equipment Peripherals PDA Safety Approvals cUL/UL Mechanical Characteristics Length: 71.7mm (2.82in) Height: 33.2mm (1.31in) Width: 50mm (1.97in) Weight: 145g (5.12oz) Output Specifications 2 DC Output Load Ripple Regulation Model Voltage Min. Max. P-P (max.) Line & Load PSC15A-050-R 5V 0A 3.0A 100mV 5% PSC15A-060-R 5.9V 0A 2.5A 100mV 5% PSC15A-075-R 7.5V 0A 2.0A 100mV 5% PSC15A-090-R 9V 0A 1.67A 120mV 5% PSA15A-120P6-R 12V 0A 1.25A 100mV 5% PSA15A-150P6-R 15V 0A 1.0A 100mV 5% PSA15A-240P6-R 24V 0A 0.65A 200mV 5% 1 PSA15A-480P6-R 48V 0A 0.31A 400mV 5% Notes: 1. NRCan approval for PSA15A-480P6-R model only 2. Measured after 30 minutes with by-pass capacitors o.1uF/10uF at output connector terminal and oscilloscope set at 20Mhz. Phihong is not responsible for any error and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 9/28/2021 PSX15A Characteristics WWW.PHIHONG.COM Input: Emissions AC Input Voltage Rating Complies with FCC Class B 100 to 240V AC Complies with EN55032 Class B AC Input Voltage Range Immunit 90 to 264V AC IEC610004-2 IEC610004-3 AC Input Frequency IEC610004-4 47 to 63Hz IEC610004-5 IEC610004-6 Input Current IEC61000-4-8 0.5A (RMS) maximum at 120V AC IEC61000-4-11 0.25A (RMS) maximum at 240V AC EN61000-3-2 Leakage Current Hold-up Time 0.25mA maximum at all line conditions 8mS minimum at 120V AC and maximum load Inrush Current <40A for 120V AC at maximum load Over-Voltage Protection <60A for 240V AC at maximum load Zener clamping if voltage exceeds 120% of (Cold start at ambient 25C) limit Input Power Saving Over-Current Protection 0.1W maximum at no load Output equipped with short circuit protection auto-restart Output: Efficiency Short-Circuit Protection US DOE Level VI Output can be shorted without damage Environmental: Dielectric Withstand (Hi-pot) Test Temperature Primary to Secondary: 3000V AC for 1 Operation 0 to +40C min., 10mA Non-operation -40 to +85C Humidity 20 to 90% DC Output Connector 2.1 x 5.5mm Center Positive Barrel