PSAA12A-120L6 Phihong

WWW.PHIHONG.COM 12W Wall Plug Adapter Features Double Insulated DOE Level VI Class B EMI Over-Voltage & Short-Circuit protections < 0.075W No-Load Current Applications Wireless Communications Portable Equipment Networking Peripherals Safety Approvals UL/cUL 62638-1 Mechanical Characteristics Length: 71.2mm (2.80in) Height: 46mm (1.81in) Width: 34mm (1.34in) Weight: 85g (3.00oz) Ref Output Specifications DC Load 1 Prong Ripple Regulation Model Output Style Min. Max. P-P (max.) Line & Load Voltage PSAA12A-120L6-R US 12V 0A 1A 240mV 5% Notes: 1. Measured with by-pass capacitors 0.1uf /10uf at output connector terminal and oscilloscope set at 20 MHz ( tested by oscilloscope) after 30 minutes warm-up Phihong is not responsible for any error and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 9/28/2021 1 PSAA12A-120L6-R Characteristics WWW.PHIHONG.COM Input: Environmental: AC Input Voltage Rating Temperature 100 to 240 V AC Operation 0C to +40C Non-operation -40C to +85C AC Input Voltage Range Humidity 90%RH Max 90 to 264V AC Emissions AC Input Frequency Complies with FCC Class B 47 to 63Hz Complies with EN55022 Class B Input Current Immunity 0.5A (RMS) max at 100VAC, max load EN50082-1: EN61000-4-2 Level 4 Leakage Current EN61000-4-5 Level 3 0.25mA max EN61000-3-2 EN61000-3-3 Inrush Current EN55024 60A 230VAC, 25C, at max load IEC610004-2 IEC610004-3 Input Power Saving IEC610004-4 <0.075W at 230Vac, no load IEC610004-5 IEC610004-6 Output: IEC610004-8 2 Efficiency IEC610004-11 DOE Level VI Dielectric Withstand (Hi-pot) Test Hold-up Time Primary to Secondary: 3000V AC for 1 min., 10mS Min. at Max load and 120Vac 60Hz 10mA Short Circuit Protection DC Output Connector Units protected against a continuous short The output dc cord shall be 1200mm 26AWG circuit and over current condition over in length. Matte black PVC insulation. DC the operating range. plug: (-) GND outside (+) Output inside Over-Voltage Protection Output voltage shall not exceed 20V Over-Current Protection 2A max Notes: 1. The characteristics defined are at ambient temperature of 25C unless otherwise specified 2. Efficiency is measured after 30 minutes burn-in