WWW.PHIHONG.COM 18 Watt Fixed Wall Plug Series Features Limited Power Source (LPS) Class II Double Insulated Class B EMI High Efficiency Level VI Compliant Low Cost Applications Wireless Communications Portable Equipment Peripherals PDA Safety Approvals cUL/UL 60950-1 Mechanical Characteristics Length: 83.5mm (3.29in) Height: 53.5mm (2.11in) Width: 35mm (1.38in) Output Specifications (1) Load Ripple Regulation DC Output Model Voltage Min. Max. P-P (max.) Line & Load PSAC18A-120L6-R 12V 0A 1.5A 240mV 5% Notes: (1)Measured after 30 minutes with by-pass capacitors o.1uF/10uF at output connector terminal and oscilloscope set at 20Mhz. Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 12/10/2018 PSAC18A Characteristics WWW.PHIHONG.COM Input: Emissions AC Input Voltage Rating Complies with FCC Class B 100 to 240V AC Complies with EN55032 Class B AC Input Voltage Range Immunity 90 to 264V AC EN61000-4-2, Level 4, contact 8kv, Air 15kV, Criteria B AC Input Frequency EN61000-4-3, Criteria A 47 to 63Hz EN61000-4-4, Criteria B EN61000-4-5, Level 3, line to neutral 1kV Input Current line/neutral to FG, Criteria B 0.5A (RMS) max at 100V AC/60Hz EN61000-4-6, Criteria A EN61000-4-8, Criteria A Leakage Current EN61000-4-11, Criteria B 0.25mA maximum at 240Vac/50Hz Hold-up Time Inrush Current 10mS min at 115Vac/60Hz, max load <40A for 115V AC at max load <60A for 230V AC at max load Over-Voltage Protection (Cold start at ambient 25C) 20.4V max at 80Vac~264Vac/50Hz, max load Output: Over-Current Protection Efficiency 3A max US DOE Level VI Dielectric Withstand (Hi-pot) Test Environmental: Primary to Secondary: 3000V AC for 1 min., Temperature 10mA Operation 0 to +40C Non-operation -20 to +70C DC Output Connector Humidity 90% RH max Barrel plug 5mm x 2.1mm x 10mm