PSAC24A-120L6 Phihong

WWW.PHIHONG.COM 24 Watt Wall Plug Adapter Features Class B EMI Class II Double Insulated Short-Circuit Protection Over-Voltage, Over-Current Protection Applications Portable Equipment Access Devices Peripherals Safety Approvals cUL/UL 60950-1 Mechanical Characteristics Length: 83.5mm (3.29in) Height: 53.5mm (2.89in) Width: 35.0mm (1.38in) Weight: 165g (5.82oz) Output Specifications (1) Load Ripple Regulation DC Output Model Voltage Min. Max. P-P (max.) Line & Load PSAC24A-120L6-R 12V 0A 2.0A 240mV 5% Notes: (1) Measured after 30 minutes with by-pass capacitors 0.1uF/10uF at output connector terminal and oscilloscope set at 20MHz. Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revised 4/8/2021 PSAC24A Characteristics WWW.PHIHONG.COM INPUT: Immunity AC Input Voltage Rating EN 61000-3-2 100 to 240V AC EN 61000-4-2 EN 61000-4-3 AC Input Voltage Range EN 61000-4-4 90 to 264V AC EN 61000-4-5 EN 61000-4-6 AC Input Frequency EN 61000-4-8 50 to 60Hz EN 61000-4-11 Input Current Dielectric Withstand (Hi-pot) Test 0.6A (RMS) maximum at 100V AC 3KVac/10mA 1minute Leakage Current FEATURES: 0.25mA max at 100Vac/60Hz & 240Vac/50Hz Over-Voltage Protection 20.4V max at 90Vac~264Vac, max load Inrush Current 40A max at 115VAC/60Hz Over-Current Protection 80A max at 230VAC/50Hz 4A max at 90Vac~264Vac, max load (Cold start at ambient 25C) Short-Circuit Protection OUTPUT: Units shall be protected against a continuous Efficiency short circuit and over current condition over DOE Level VI the operating range. A continuous short circuit shall not produce excessive heat and no smoke Hold-up Time or fire 10ms min at 115Vac/60Hz &230Vac/50Hz, max load DC Output Connector 2.1 x 5.5mm Center Positive Barrel ENVIRONMENTAL: Temperature Operation 0 to +40C Non-operation -20 to +70C Humidity 90%RH max Emissions Complies with FCC Class B Complies with EN55032 Class B