Power Supply, Primary Switch Mode, Narrow Design MINI-PS-100-240AC/24DC/4 MINI POWER provides: Extra narrow widths of 22.5, 45, and 67.5 mm (0.886, 1.772, and 2.657 in.) Global use due to a wide range input A high level of operational safety in complex global networks Reliable startup of heavy loads due to POWER BOOST The reliability of a power supply determines the availability of individual components in a system and whether complex systems can function safely. The globalization of markets increases the demands placed on the power supply. A wide range input and a high level of availability are required. These requirements are met by MINI POWER. 1. Short Description MINI POWER is the extra narrow power supply, which is available in widths of 22.5, 45, and 67.5 mm (0.886, 1.772, and 2.657 in.). In addition to a 24 V version with output currents of 1 A, 2 A, and 4 A, special voltages are also available with 5 V/3 A, +/-15 V/1 A, and 10 - 15 V/2 A. 2. Area of Application Reliable startup of heavy loads is ensured by a power reserve of up to 100% - the POWER BOOST. The high level of operational safety is also ensured in MINI POWER can be used globally due to the complex global networks. MINI POWER also operates consistent provision of a wide range input. in applications where static voltage dips, transient In this way, your entire system can be tested at any power supply failures or phase failure are common. production location in the world and can be delivered to Large capacitors ensure mains buffering of more any location in the world without faulty switching of the than 20 ms at full load. input voltage. This reduces storage costs and logistical effort. An international approval package including UL 60950 for IT equipment and UL 508 for industrial control equipment enables the device to be used globally. Headquarters: Phoenix Contact GmbH & Co. KG Flachsmarktstrae 8 32825 Blomberg Germany Phone +49 - 52 35 - 30 0 Fax +49 - 52 35 - 34 12 00 www.phoenixcontact.com Local Contact: www.phoenixcontact.com/salesnetwork Power Supply, Primary Switch Mode, Narrow Design MINI-PS-100-240AC/24DC/4 3. Technical Data 114.5 mm (4.508 in.) L (+) N () DC OK 67.5 mm (2.657 in.) MINI-PS-100-240AC/24DC/4 1 AC U u 7 solid exible torque 2 mm AWG Nm Ib in. Input 0.2 - 2.5 0.2 - 2.5 25 - 14 0.5 - 0.6 4.4 - 5.3 Output 0.2 - 2.5 0.2 - 2.5 25 - 14 0.5 - 0.6 4.4 - 5.3 Signal 0.2 - 2.5 0.2 - 2.5 25 - 14 0.5 - 0.6 4.4 - 5.3 Pcs. Description Type Order No. Pkt. Power Supply Primary switch mode, narrow design MINI-PS-100-240AC/24DC/4 29 38 83 7 1 Technical Data Input Data 1 Nominal input voltage 100 - 240 V AC (wide range input) Input voltage range (current consumption) 85 - 264 V AC 90 - 350 V DC Frequency 45 - 65 Hz 0 Hz Current consumption (for nominal values) 1.3 A (120 V AC)/0.8 A (230 V AC), approximately 2 2 Inrush current limiting/I t (+25C +77F ) < 20 A/< 2.1 A s, typical Mains buffering for a nominal load (typical) > 20 ms (120 V AC)/> 100 ms (230 V AC) Switch-on time after applying the mains voltage < 0.4 s Transient surge voltage protection Varistor Input fuse, internal T3.15 AL 250 V (device protection) Recommended fuse Line protection switch 6 A, 10 A, Characteristic B (EN 60 898) Output Data 2 Nominal output voltage U /tolerance 24 V DC/1% N Setting range for the output voltage 22.5 - 28.5 V DC Output current during convection cooling and nominal values POWER BOOST I (t = 2 min., typical) Up to 6 A (U = 24 V DC) BOOST out -25C to +40C (-13F to +104F) 5A (U = 24 V DC) out Nominal output current I -25C to +60C (-13F to +140F) 4 A (U = 24 V DC) N out Derating From +60C (+140F), 2.5% per Kelvin Short-circuit current limit 9 A, approximately Startup of capacitive loads Unlimited System deviation on: Load change static 10 - 90% < 1%, typical Load change dynamic 10 - 90% < 3%, typical Input voltage change 10% < 0.1%, typical Maximum power loss No load/nominal load 2.5 W/12 W Level of efciency (typical) > 88% (for 230 V AC and nominal values) Response time U (10% - 90%) 0.3 ms OUT Residual ripple/switching peaks (20 MHz) < 100 mV (for nominal values) pp Can be connected in parallel To increase redundancy and power Internal surge voltage protection Yes, limited to 35 V DC, approximately Resistance to return supply 35 V DC Signal Output Data DC OK (active) (U > 0.9 x U = high signal) +24 V signal/20 mA, maximum out N LED (U > 21.5 V DC = LED permanently on) Green LED out PHOENIX CONTACT page 2 of 8 99 mm (3.898 in.)