69900100 PLAZMO INDUSTRIES

PLAZMO INDUSTRIES PHONE402-330-2222 FAX886-499-2235 69900100 SPECIFICATION Document NoSA-201501026-01 (AM-3667A-GRB1-FDA) Version No: A Customers part No6.2 Touchscreen Product No69900100 Issue Date 2017-11-04 1. Product description 1.1 4 Wire Resistance Type 1.2 Film/Glass Type 2. Criteria of Materials 2.1 Upper Electrode film 2.1.1 Base material: ITO Film 2.1.2 Type: Haze and anti-glare hard ring 2.1.3 Thickness: 18810m 2.1.4 Resistance: 400100/sq 2.2 Lower Electrode 2.2.1 Base material: ITO Glass 2.2.2 Thickness: 1.10.1mm 2.2.3 Resistance400100/sq 2.3 Connector Tail 2.3.1 FPC 3. Characteristics 3.1 Mechanical characteristics 3.1.1 Outside dimension 165.000.20 mm70.000.20 mm 3.1.2 View area 153.000.20mm58.760.20mm 3.1.3 Thickness 1.500.15mm 3.1.4 Input method Pen 3.1.5 Operating force 20~100g (A.A area shrink within 3mm) Shape of pen end: 0.3 mm 0.5mm 3.1.6 Hardness of surface Hard surface : 3H JIS K 5400 3.1.7 Heat seal intensity: X>2.0kgf Y>500gf Z>200gf 3.2 Electrical characteristics 3.2.1 Operating Voltage DC5V 35mA 3.2.2 Loop resistance: X50-450 Y800-1250 3.2.3 Linearity : 2.0% 3.2.4 Insulation resistance: 20M At DC 25V. 3.2.5 Insulation ability: 60sec. At DC 25V. 3.2.6 Chatting times: <10ms 3.2.7 C5nf 3.3 Optical characteristics 3.3.1 Total Transmittance: 76% JISK7105 4. Processing Environment 4.1 Operating Temperature: -20+60 4.2 Operating Humidity: 90%RH 4.3 Storage Temperature: -30+70 4.4 Storage Humidity: 90%RH 5. Environmental test 5.1 High temperature +70120 hr. 5.2 Low temperature -20120 hr. 5.3 High temp./high humidity test: 60&90%, 120hr. 5.4 High Low temperature test: -20 30min/+70 30min This is the test1 Cyclewithin 24hr30min in either temperature increase or decrease. Taken from our environmental measurement machine, and placed 24hr in room temperature before test. The followings conditions are be required. Closed impedance