PSC-12300A-C Power-Sonic

A-C SERIES SWITCH-MODE CHARGERS FOR SLA BATTERIES Features Operating Characteristics I.C. based v oltage and current regulation designed for A-C series chargers are new switching type devices sealed (valve-regulated) lead-acid batteries which operate without the use of transformers. I.C.s control and regulate current and voltage and automatically switch Useable on domestic and overseas input voltages from the higher fast charge voltage to the lower float from 110VAC - 60Hz to 240VAC - 50Hz, except for the voltage when batteries are very close to being fully charged. PSC-1210000A-C, see charger selection guide At the float voltage it is safe to leave the battery connected A utomatic, current sensing dual-rate charging for to the charger indefinitely, making charging pretty much efficient, care-free and safe operation fool-proof. L.E.D.s indicate power on and FAST and FLOAT charging modes In the fast charge mode voltage goes up to 2.45V +/- 0.05V before switching, in the float charge mode voltage is held Lightw eight wall mounted plug-in or desk top design between 2.25- 2.30V/cell. with screw type output terminals, depending on output current This charger is ideal for cyclic applications where recharge Connectors to the battery are alligator clips with time is critical and timely charge termination cannot insulated sleeves be counted on. This charger ensures optimum battery Pr otected against accidental reverse polarity connection performance & service life. U.L. and European C.E. approval Specifications Output Dimensions: in. (mm) Weight Nominal Output Voltage Type Charger Model Current Float/Fast Charge Voltage Automatic Design mA Length Width Height lbs. kgs. PSC-6300A-C 6 6.75 / 7.35 300 dual rate 2.05 (52) 1.57 (40) 2.64 (67) 0.21 0.10 Plug-in PSC-6500A-C 6 6.75 / 7.35 500 dual rate 2.05 (52) 1.57 (40) 2.64 (67) 0.21 0.10 Plug-in PSC-61000A-C 6 6.75 / 7.35 1000 dual rate 2.24 (57) 1.73 (44) 3.23 (82) 0.30 0.14 Plug-in PSC-64000A-C 6 6.75 / 7.35 4000 dual rate 5.43 (138) 2.83 (72) 1.65 (42) 0.90 0.41 Desk Top PSC-12300A-C 12 13.50 / 14.70 300 dual rate 2.05 (52) 1.57 (40) 2.64 (67) 0.21 0.10 Plug-in PSC-12500A-C 12 13.50 / 14.70 500 dual rate 2.24 (57) 1.73 (44) 3.23 (82) 0.30 0.14 Plug-in PSC-12800A-C 12 13.50 / 14.70 800 dual rate 2.24 (57) 1.73 (44) 3.23 (82) 0.30 0.14 Plug-in PSC-122000A-C 12 13.50 / 14.70 1800 dual rate 5.43 (138) 2.83 (72) 1.65 (42) 0.90 0.41 Desk Top PSC-124000A-C 12 13.50 / 14.70 4000 dual rate 5.43 (138) 2.83 (72) 1.65 (42) 0.90 0.41 Desk Top PSC-1210000A-C* 12 13.50 / 14.70 10000 dual rate 8.80 (224) 5.17 (131) 3.33 (85) 4.30 1.95 Desk Top PSC-241000A-C 24 27.00 / 29.40 1000 dual rate 5.43 (138) 2.83 (72) 1.65 (42) 0.90 0.41 Desk Top Note: All plug-in design have 39 (1m) leads. All desktop design have 59 (1.5m) input leads and 39 (1m) output leads. Weve Got The Power.Charger Selection Guide Use with Battery U.L./C.E. Charger Model Max Output (mA) Certified Voltage Capacity PSC-6300A-C 300 6 1-3 AH YES PSC-6500A-C 500 6 2-5 AH YES PSC-61000A-C 1000 6 5-10 AH YES PSC-64000A-C 4000 6 10-40 AH YES PSC-12300A-C 300 12 1-3 AH YES PSC-12500A-C 500 12 2-5 AH YES PSC-12800A-C 800 12 4-8 AH YES PSC-122000A-C 1800 12 8-20 AH YES PSC-124000A-C 4000 12 20-40 AH YES PSC-1210000A-C* 10000 12 40-100 AH NO PSC-241000A-C 1000 24 5-10 AH YES * Please note the PSC-1210000A-C is only available for use with input voltages of 90-132V 60 Hz. This charger is ideally suited for batteries from 40-100AH. Notes Recharge time depends on the depth of the preceding When charging batteries in series (positive terminal discharge and the output current of the charger. To of one battery is connected to negative of the other) all determine the approximate recharge time of a fully batteries in the string will receive the same amount of discharged battery, divide the batterys amp. hrs. by charge current, individual battery voltages may vary. the rated output current of the charger and multiply the resulting number of hours by a factor of 1.75 to When charging batteries in parallel (positive terminals compensate for the declining output current during the are connected with positive terminals, negative terminals charge cycle. If the amount of amp. hrs. discharged with negative), all batteries in the string are subject to the from the battery is known, use it instead of the batterys same charge voltage, but the charge current each battery capacity to make the calculation. receives can and will vary until equalization is reached. To ensure safe and efficient operation always refer to our Charger Operating Instructions, as published on our website. Power-Sonic does not offer chargers for batteries with capacities higher than 100 AH. If you have any queries or difficulties in locating a suitable charger for batteries above 100AH, our T echnical department will be happy to help. www.power-sonic.com Contact Information INTERNATIONAL SALES DOMESTIC SALES CUSTOMER SERVICE TECHNICAL SUPPORT Tel: +1-650-364-5001 Tel: +1-619-661-2020 Tel: +1-619-661-2030 Tel: +1-619-661-2020 Fax: +1-650-366-3662 Fax: +1-619-661-3650 Fax: +1-619-661-3648 Fax: +1-619-661-3648 international-sales power-sonic.com national-sales power-sonic.com customer-service power-sonic.com support power-sonic.com CORPORATE OFFICE 7550 Panasonic Way San Diego, CA 92154 USA Tel: +1-619-661-2020 Fax: +1-619-661-3650 0812 1M 2012. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners.