CP2A Powerconnections

Euro / Indian CP2 Technical Data & Fitting Instructions Description The 2 Pin European VDE to Indian Converter Plug (CP2) is an adapter that converts the European CEE VII VDE Plug to the BS 546 system format. The plug is designed and manufactured to meet the requirements of BS 546. It complies fully with the LVD and Plug and socket safety regulations. The design of the clamping method ensures the body of the European CEE VII plug is enclosed. It is tested for use with plug top power supplies (e.g. mobile phone chargers). Classification - Adapter, Single Portable, - Re-wireable plug, - Normal Use, - Converts CEE7 plug top power supplies and CEE7 plugs to the BS 546 Format, - Suitable for class 2 devices (unearthed) only. - Not suitable for any other plug system. Certification - Intetek marked ET-R0310853 to BS 546 Relevant Standards - BS 546 BS EN 61558 Transformers Rating - Voltage 230V ac (Nominal) - Current 8 amps continuous, 10 amps max. - Load 2000 Watts Max - Frequency 50 Hz - Environmental Protection IP 3X (BS546 Accessory Rating) - Flammability V2 (External Casing) - Mechanical Strength 100 Drops 500mm - Colour Black or White - Weight 50 Grams Typical - Finish Plain and Fine Sparkle - Retaining Screw Plain or Tamperproof Note: - Tolerance as per relevant British Standard. Safety Design Features - Single screw operation to secure VDE plug - No Loose parts - Non-removable cover - Plug Features designed to meet the requirements of BS 546 - Meets the requirements of the Indian Plug and socket regulations. Installation System The Euro / Indian plug (CP2) is designed for use within the BS 546 Plug and Socket system only. Fitting The Euro / Australian plug (CP2) should be fitted as follows 1. Insert the power supply or CEE7 plug in to the Europlug 2. Tighten retaining screws to 6.12 Kgf.cm 3. TEST: Grip the CP2 and pull the VDE cordset/transformer to ensure fully secure, if not then increase the torque setting and further tighten. Re-test. 4. Now the CP2 is ready for use. NOTE: Cover in non-removable the screw does not release the cover. Service Conditions - Temperature Range - Storage -40C to +70C Ambient - Working -50C to +40C 95% RH Ambient - Altitude 2000m above sea level max - Not subject to exposure to direct radiation from the sun - Abnormal Condition Avoid pollution by smoke, chemical and flammable fumes salt laden spray, periods of high humidity > 95% relative humidity (RH)