1SD210F2 Data Sheet 1SD210F2-FX400R65KF2 Single-Channel SCALE Plug-and-Play IGBT Driver Ultra compact, high-performance driver for 2-level, 3-level and multilevel converters Abstract The SCALE plug-and-play driver 1SD210F2-FX400R65KF2 is a compact single-channel intelligent gate driver designed for Infineons high-voltage IGBTs of type FD400R65KF2-K and FZ400R65KF2. The driver features a fiber-optic interface and a selectable operation mode via a jumper. For drivers adapted to other types of high-power and high-voltage IGBT modules, refer to www.IGBT-Driver.com/go/plug-and-play Product Highlights Applications Plug-and-play solution Three/multi-level converters Protects the IGBT from short-circuit failure Two-level converters Active clamping of V at turn-off Medium-voltage converters ce Extremely reliable long service life High-voltage applications No electrolytic capacitors Industrial drives Gate current up to 6A/+10A Traction Fiber-optic links Railroad power supplies Monitoring of supply voltage and fiber optics Wind-power converters Switching frequency DC to max. 9kHz Radiology and laser technology Duty cycle 0... 100% Research Suitable DC/DC power supply as separate unit Almost all other conceivable Shortens application development time applications IGBT-Driver.com Page 1 1SD210F2 Data Sheet 1SD210F2-FX400R65KF2 Important Notes This data sheet contains only product-specific data. For a detailed description, must- read application notes and common data that apply to the whole series, please refer to the Description and Application Manual for 1SD210F2 SCALE High-Voltage IGBT Drivers. When applying SCALE plug-and-play drivers, please note that these drivers are specifically adapted to a particular type of IGBT module. Therefore, the type designation of SCALE plug-and-play drivers also includes the type designation of the corresponding IGBT module. These drivers are not valid for IGBT modules other than those specified. Incorrect use may result in failure. Mechanical and Electrical Interfaces Dimensions: 156 x 79.5 mm. Mounting Principle: Direct screw mount on IGBT. Interface Remarks Part type Drive signal input (Standard) Fiber-optic receiver (Notes 14,16) HFBR-2522 Drive signal input (Opt. 01) Fiber-optic receiver (Notes 14,16) HFBR-2522 Drive signal input (Opt. 02) Fiber-optic receiver (Notes 14,20) HFBR-2412T Status output (Standard) Fiber-optic transmitter (Notes 14,17) HFBR-1522 Status output (Opt. 01) Fiber-optic transmitter (Notes 14,17) HFBR-1522 Status output (Opt. 02) Fiber-optic transmitter (Notes 14,21) HFBR-1412T Power supply connector On-board connector (Note 15) 77315-101-05 Power supply connector Designator Pin numbers Ground GND (Note 19) 1, 2, 4, 5 Supply voltage V 3 DC Page 2 CT-Concept.com