ProLight PK2N-3LxE-SD 3W Power LED Technical Datasheet Version: 1.6 Features Main Applications 100% foot print compatible with Cree Entertainment Lighting XP-C / XP-E / XP-G Commercial Lighting Best thermal material solution of the world Indoor Lighting Best Moisture Sensitivity:JEDEC Level 1 Outdoor Lighting RoHS compliant Introduction ProLight Phenix 3535, is one of the smallest high power LED footprint available by ProLight Opto, has offered extended solid-state lighting design possibilities.ProLight Phenix 3535 is designed with ProLight own Patents and using copper leadframe, the best thermal material of the world. Phenix 3535 qualifies as the JEDEC Level 1 MSL sensitivity level and suitable for SMD process, Pb free reflow soldering capability, and full compliance with EU Reduction of Hazardous Substances (RoHS) legislation. 2014/04 No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, DS-0008 Taiwan (R.O.C.) Tel +886-3-461-8618 Fax +886-3-461-8677 www.prolightopto.com We Provide the Light to the world Emitter Mechanical Dimensions Notes: 1. The cathode side of the device is denoted by the chamfer on the part body. 2. Electrical insulation between the case and the board is required. Do not electrically connect either the anode or cathode to the slug. 3. Drawing not to scale. 4. All dimensions are in millimeters. 5. Unless otherwise indicated, tolerances are 0.10mm. 6. Please do not solder the emitter by manual hand soldering, otherwise it will damage the emitter. 7. Please do not use a force of over 0.3kgf impact or pressure on the lens of the LED, otherwise it will cause a catastrophic failure. *The appearance and specifications of the product may be modified for improvement without notice. 2 No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, Taiwan (R.O.C.) Tel +886-3-461-8618 Fax +886-3-461-8677 www.prolightopto.com We Provide the Light to the world