FPA-016-6016-AST Pro Power

Heat Shrink Tubing Assortment Kit Description: Single Wall Flexible Heat Shrink Radiation Cross-Linked Polyolefin Tubing: Upon the Application of heat in Excess of 250F (121C), Tubing Shrinks and Conforms to the Geometry to be Covered. Shrinkage: 2:1 Inside Diameters Conform to: MIL-I-23053/5 Length: 6 1/8 Typical Properties: Physical: Tensile Strength : 2,400 PSI Ultimate Elongation : 400% Longitudinal Change : 5% 4 Secant Modulus (2%) : 1.7 10 PSI 2 Specific Gravity : 1.3 g/cm (Black) 2 0.93 g/cm (Clear) Heat Aging Elongation (336 hrs 175C) 175 Heat Shock (4 hrs 250C) No Dripping, Cracking Low Temperature Flexibility: (4 hrs -55C) No Cracking Electrical: Dielectric Strength : 900V/Mil 15 Volume Resistivity : 10 -cm Chemical: Corrosive Effect : Non-Corrosive Solvent Resistance Tensile Strength : 1,000 PSI Dielectric Strength : 400 V/Mil Water Absorption : 0.2% Fungus Resistance : Non-Nutrient UL Recognized : E52331 CSA Approved : LR382278M Mil. Spec : MIL-I-23053/5 Class 1,2 AMS-3636, AMS-3637 www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <1> 16/08/12 V1.0Heat Shrink Tubing Assortment Kit Part Number Table Size Description Qty Colour Part Number (Inch) 3/64 Red 1/16 Yello 3/32 6 Blue FPA-003-6030-AST 1/8 White Heat Shrink Tubing Assortment Kit 3/16 Clear 1/4 Red 3/8 Yellow 4 FPA-016-6016-AST 1/2 Blue 3/4 White Important Notice : This data sheet and its contents (the Information) belong to the members of the Premier Farnell group of companies (the Group) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Groups liability for death or personal injury resulting from its negligence. pro - POWER is the registered trademark of the Group. Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <2> 16/08/12 V1.0