Tapes Features: Good gap-filling between slightly uneven materials Very high adhesion to most common materials Tested by FIRA for the application of mirror mounting Suggested tape coverage 40cm2/Kg of mirror (BS 7449,1991) Good tack copes well with difficult surfaces and conditions High shear and foam strength for mounting and holding Good long term ageing and resistance to water Outstandingly reliable general purpose product A strong white closed cell PE foam coated on both sides with a high performance rubber based adhesive giving very high tack while retaining high shear Limitations Limited resistance to solvents, plasticisers, UV light and high temperatures Technical Details Thickness : 0.9 mm Peel Adhesion at 23C : 25* N / 25 mm Peel Adhesion at 70C : N / 25 mm 2 Shear (AFERA) at 23C : 120 N / 625 mm Shear (PSTQ at 23C : 1,000 hrs Temperature Range : -40 to +60C Minimum Application Temperature : +10C * Foam Tears Availability HSHT 0.8 is also available in black Roll widths from 6 mm to 1,350 mm Roll lengths normally 50 m or 100 m for other lengths please enquire Pads, sheets and die-cut shapes Part Number Table Description Part Number Tape, 2 Sided, Foam, 25 MM, PK25 HSHT STRIP 0.8X25X150 Tape, 2 Sided, Foam, 25 MM HSHT ROLL 0.8X25MMX5M Tape, 2 Sided, Foam, Precut HSHT PADS 0.8X12X25MM Tape, 2 Sided, Foam, Precut HSHT PADS 0.8X25X25MM Important Notice : This data sheet and its contents (theInformatio) belong to the members of the Premier Farnell group of companies (theGrou) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group s liability for death or personal injury resulting from its negligence. Pro-POWER is the registered trademark of the Group. Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <1> 11/04/12 V1.1X-ON Electronics Authorized Distributor Click to view similar products for Pro Power manufacturer. Other Similar products are found below : PPCY4C075100M PPCY3C10050M PPC217 PP001328 PP001316 PP001109 PP001088 PP000940 PP030 PP000909 PP001326 PP001308 PP000877 PP000868 PP000704 PP001163 PP001156 PP001085 PP000510 PP001076 PP000944 PP000914 PP000407 PP000386 PP000870