Technibond Safety Datasheet th Creation date: 30 August 2006 Replaces: Health & Safety information sheet 5/3/93 1. IDENTIFICATION OF THE PRODUCT & THE COMPANY Product name: Applicable to all Technibond adhesive tapes Supplier: Technibond Limited Millboard Road Bourne End Buckinghamshire SL8 5 XD Tel. 01628 642800 Fax. 01628642810 2. INFORMATION ON COMPOSITION Products are supplied in sheets, rolls, bobbins or as individual components and typically consist of a substrate coated on one or both sides with a pressure-sensitive adhesive. The composition is described in individual product data sheets. 3. POSSIBLE HAZARDS These products are not known to contain any materials falling within the scope of the Control of Substances Hazardous to Health Regulations. 4. FIRST AID MEASURES Inhalation: Not applicable under normal conditions of use. Skin contact: Not specifically applicable. Product will adhere temporarily to skin, and may cause reddening on removal. If an allergic reaction occurs discontinue use. Eye contact: Not specifically applicable. Ingestion: Not specifically applicable. 5. FIRE FIGHTING MEASURES Products will burn on contact with flame: small fires are best extinguished by CO , 2 foam or dry powder. Combustion products will depend on the conditions of combustion but will typically included smoke and harmful fumes, such as CO, NO , x so larger scale fires should only be fought using self-contained breathing apparatus. 6. ACCIDENTAL RELEASE MEASURES Personal protection: Does not require any specific handling procedures. Environmental protection: The products do not present any particular risk to the environment. Methods for cleaning up: Transfer material into a suitable container for disposal. 7. HANDLING & STORAGE Safe methods of storage and handling should be applied. The protective release liner supplied on these products is very slippery and must not be left on any floor space: discarded release liner should immediately be placed in waste containers. Cut edges of paper are sharp and can cut the skin if handled carelessly. During conversion, static build-up may occur, and attention should be given to operator comfort and the presence of any inflammable fluids. Static elimination equipment may be appropriate. 8. EXPOSURE CONTROLS & PERSONAL PROTECTION Technical measures: Does not require any measures in addition to good industrial hygiene. Personal protection: Not specifically applicable. 9. PHYSICAL & CHEMICAL PROPERTIES Appearance: Solid Odour: Faint pH: Not applicable Boiling point: Not applicable Melting point: The product will melt at high temperatures (see individual product datasheet) Flash point: Not applicable