Medium Wall Tubing Adhesive-Lined, Flame-Retardant, Polyolefin, Heat Shrink Description The series of medium wall general purpose tubing is specially designed for use in a broad range of low-voltage applications. Tough and flexible, the tubing is particularly suited for the insulation and protection of cable joints as well as for cable repair. Uncoated tubing provides insulation and strain relief. Adhesive lined tubing also provides an environmental seal. Specifications Operating temperature : -45C to +125C Fully shrink temperature : 125C Shrink Ratio : 3:1 Colour : Black Resistant to UV Technical Data Property Test Method Typical Data Tensile Strength ASTM D2671 14MPa Elongation ASTM D2671 400% 3 Density ASTM D792 1.2g/cm Longitudinal change UL 224 10% Elongation after aging UL224 158C168hrs 300% Heat shock UL224 225C4hrs No cracking Dielectric strength IEC 243 20kV/mm 14 Volume resistivity IEC 93 10 .Cm Water absorption ASTM-D570 0.15% Self-extinguish Flammability VW-1 in 30 seconds Hot Melting Adhesive Property Property Test Method Typical Data Water absorption ASTM D570 0.2% Softening point ASTM E28 95C Peel strength(PE) ASTM D1000 120N/25mm Peel strength(AL) ASTM D1000 80N/25mm www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <1> 23/03/18 V1.0Medium Wall Tubing Adhesive-Lined, Flame-Retardant, Polyolefin, Heat Shrink Product Dimensions Size As Supplied After Recovery Part Internal Out layer Wall Adhesive Layer Total Wall Internal Number mm Diameter Thickness Wall Thickness Thickness Diameter (mm) (mm) (mm) (mm) (mm) PP001863 10.2/3 10.2 3 1.43 0.4 0.53 0.2 1.96 0.5 PP001864 19.1/5.6 19.1 5.6 1.83 0.4 0.63 0.2 2.66 0.5 PP001865 28/9 28 9 1.95 0.4 0.78 0.2 2.73 0.5 PP001866 38.1/12 38.1 12 2.05 0.4 0.78 0.2 3.13 0.5 PP001867 43.2/12.7 43.2 12.7 2.15 0.4 0.78 0.2 3.13 0.5 PP001868 63/19 63 19 2.35 0.5 0.88 0.3 3.53 0.6 Part Number Table Description Part Number Tubing, Heat Shrink, Medium Wall, W/Adhesive, 3:1, 9mm, Black, 1.22m PP001863 Tubing, Heat Shrink, Medium Wall, W/Adhesive, 3:1, 19.1mm, Black, 1.22m PP001864 Tubing, Heat Shrink, Medium Wall, W/Adhesive, 3:1, 28mm, Black, 1.22m PP001865 Tubing, Heat Shrink, Medium Wall, W/Adhesive, 3:1, 38.1mm, Black, 1.22m PP001866 Tubing, Heat Shrink, Medium Wall, W/Adhesive, 3:1, 43.2mm, Black, 1.22m PP001867 Tubing, Heat Shrink, Medium Wall, W/Adhesive, 3:1, 63mm, Black, 1.22m PP001868 Important Notice : This data sheet and its contents (the Information) belong to the members of the Premier Farnell group of companies (the Group) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Groups liability for death or personal injury resulting from its negligence. pro - POWER is the registered trademark of the Group. Premier Farnell Limited 2016. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <2> 23/03/18 V1.0