SP3X24/8-1.2MBLACK Pro Power

Heat Shrink Tubing 3:1 Shrink Ratio Features: Flexible, flame retarded heat shrinkable Polyolefin tubing Operating temperature range : -55C to +135C Shrink temperature : 100C Notes : High shrink ratio accommodates difficult or irregular shapes Specification Values Property Test Method Values Physical - - Tensile Strength 10 Mpa (min.) ISO 37 Ultimate Elongation 250% (min.) Specific Gravity ISO 1183 1.35 (max.) Heat Shock ASTM D2671 (4 hours at 250C) No dripping, cracking or flowing Heat Ageing ISO 188 (168 hours at 175C) - Heat Ageing (Ultimate Elongation) ISO 37 150% (min.) Low Temperature Flexibility ASTM D2671 (4 hours at -55C) no cracking Flammability (Except Clear) ASTM D876 pass Electric Strength IEC 243 20 KV / mm (min.) Corrosion (Copper Contact and Copper Mirror) ASTM D2671 no corrosion Water Absorption ISO 62 0.5% (max.) Fluid Resistance ISO 1817 - Fluid Resistance (Gasoline) - - Fluid Resistance (Hydraulic Fluid) - - Fluid Resistance (Lubricating Oil) - - Fluid Resistance (Tensile Strength) ISO 37 5MPa (min.) Fluid Resistance (Ultimate Elongation) - 200% (min.) Fungus Resistance ISO 846 - Fungus Resistance (Tensile Strength) ISO 37 10Mpa Fungus Resistance (Ultimate Elongation) - 250% (min.) www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <1> 04/04/12 V1.1Heat Shrink Tubing 3:1 Shrink Ratio Specification Table Minimum Maximum Nominal Standard Length Coil Length Colour Part Number Expansion Recovered Recovered Wall (m) (m) 1.5 0.5 0.45 - SP3X15/1.2/BLACK 3 1 0.55 - SP3X3/1-1.2 BLACK 4.55 1.5 0.6 - SP3X4.5/1.5-1.2MBLACK 6 2 0.65 - SP3X6/2-1.2MBLACK 9 3 1.2 - SP3X9/3-1.2MBLACK 0.75 12 4 - SP3X12/4-1.2MBLACK 18 6 0.85 - SP3X18/6-1.2MBLACK 24 8 1 - SP3X24/8-1.2MBLACK 39 13 1.15 - SP3X39/13-1.2MBLACK Black 1.5 0.5 0.45 - SP3X15/5/BLACK 3 1 0.55 - SP3X30/5/BLACK 4.55 1.5 0.6 - SP3X45/5/BLACK 6 2 0.65 - SP3X6/2-5MBLACK 9 3 - 5 SP3X9/3-5MBLACK 0.75 12 4 - SP3X12/4-5MBLACK 18 6 0.85 - SP3X18/6-5MBLACK 24 8 1 - SP3X24/8-5MBLACK 39 13 1.15 - SP3X39/13-5MBLACK Dimensions : Millimetres (Unless Specified) Important Notice : This data sheet and its contents (theInformatio) belong to the members of the Premier Farnell group of companies (theGrou) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group s liability for death or personal injury resulting from its negligence. Pro-POWER is the registered trademark of the Group. Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <2> 04/04/12 V1.1