PLC03-6
Only One Name Means ProTekTion
HIGH POWER st EERIn G d IOd E/t Vs ARRAY
dE sCRIPt IOn
The PLC03-6 is a low capacitance, high powered steering diode/ TVS array available in a SO-8 package. This device is
designed to protect high speed data line applications from the damaging eects of Eff SD, EFT and secondary transient
threats.
The PLC03-6 has a peak pulse power rating of 2000 Watts for an 8/20s waveshape. This devices meets the IEC
61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements.
sO-8 PACkAGE
APPLICAt IOns
FEAtu REs
Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV T1/E1 Line Cards
Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns ISDN U-Interfaces & ISDN S/T Interfaces
xDSL Interfaces
Compatible with IEC 61000-4-5 (Surge): 94A, 8/20s - Level 4(Line-
Ethernet 10/100/1000 Base T
Gnd) & 48A, Level 4(Line-Line)
100A (2/10s) per Bellcore GR1089 (Intra-Building)
ESD Protection > 25 kilovolts
2000 Watts Peak Pulse Power per Line (tp = 8/20s)
Low Capacitance < 20pF Typical
RoHS Compliant
REACH Compliant
MECHAn ICAL CHARACt ERIst ICs
Molded JEDEC SO-8 Package
Approximate Weight: 70 milligrams
Lead-Free Pure-Tin Plating (Annealed)
Solder Reflow Temperature:
Pure-Tin - Sn, 100: 260-270C
12mm Tape and Reel Per EIA Standard 481
Flammability Rating UL 94V-0
PIn COn FIGu RAt IOn
8 7 6 5
1 2 3 4
www.protekdevices.com
05080.R9 9/12 Page 1
05080PLC03-6
Only One Name Means ProTekTion
t YPICAL d EVICE CHARACt ERIst ICs
MAXIMu M RAt In Gs @ 25C unless Otherwise specified
PARAMEt ER sYMBOL VALu E un Its
Operating Temperature T -55 to 150 C
L
Storage Temperature T -55 to 150 C
STG
Peak Pulse Power (tp = 8/20s) - See Figure 1 P 2000 Watts
PP
ELECt RICAL CHARACt ERIst ICs PER LIn E @ 25C unless Otherwise specified
PARt d EVICE RAt Ed MIn IMu M MAXIMu M MAXIMu M t YPICAL t YPICAL
nu MBER MARkIn G st And -OFF BREAkd OWn CLAMPIn G LEAkAGE CAPACItAn CE CAPACItAn CE
VOLtAGE VOLtAGE VOLtAGE Cu RREnt (note 2) (note 3)
(Fig. 2)
(note 1)
@1mA @V @0V, 1MHz @0V, 1MHz
WM
V V @ 8/20s I C C
WM (BR) d j(sd ) j(sd )
VOLts VOLts V @ I A pF pF
C PP
PLC03-6 PBA 6.0 6.8 20.0V @ 100.0A 25 16 8
n Ot Es
1. For an 8/20s waveform, apply positive pulse to pin 1 or 8 to pin 2 or 3 (ground).
2. Measured between I/O pins and ground (pin 1 to 2).
3. Measured between I/O pins (pin 1 to 4).
www.protekdevices.com
05080.R9 9/12 Page 2
05080