PSOT03LC - PSOT36LC
Only One Name Means ProTekTion
500 WATT ULTRA LOW CAPACITANCE TVS ARRAY
DESCRIPTION
The PSOTxxLC series are ultra low capacitance transient voltage suppressor (TVS) arrays, designed for power or data
line applications that provide protection against ESD, tertiary lightning and switching transients. This series offers low
clamping voltage for the protection of sensitive components.
The PSOTxxLC series has a peak pulse power of 500 Watts for an 8/20s waveshape and is available in a SOT-23 pack -
age configuration. This series meets the IEC 61000-4-2, 61000-4-4 and IEC 61000-4-5 requirements.
SOT-23 PACKAGE
APPLICATIONS
FEATURES
Compatible with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV Ethernet 10/100 Base T
Compatible with IEC 61000-4-4 (EFT): 40A, 5/50ns Cellular Phones
FireWire
Compatible with IEC 61000-4-5 (Surge): 12A, 8/20s - Level 1(Line-
Audio/Video Inputs
Ground) & Level 2(Line-Line)
500 Watts Peak Pulse Power per Line(tp = 8/20s) Portable Electronics
Low Clamping Voltage
Ultra Low Capacitance
Available in Multiple Voltages Ranging from 3V to 36V
RoHS Compliant
REACH Compliant
MECHANICAL CHARACTERISTICS
Molded JEDEC SOT-23 Package
Approximate Weight: 8 milligrams
Lead-Free Pure-Tin Plating (Annealed)
Solder Reflow Temperature:
Pure-Tin - Sn, 100: 260-270C
Flammability Rating UL 94V-0
8mm Tape and Reel per EIA Standard 481
PIN CONFIGURATION
1
3
2
www.protekdevices.com
05066.R8 10/12 Page 1
05066PSOT03LC - PSOT36LC
Only One Name Means ProTekTion
TYPICAL DEVICE CHARACTERISTICS
MAXIMUM RATINGS @ 25C Unless Otherwise Specified
PARAMETER SYMBOL VALUE UNITS
Peak Pulse Power (tp = 8/20s) - See Figure 1 P 500 Watts
PP
Operating Temperature T -55 to 150 C
L
Storage Temperature T -55 to 150 C
STG
ELECTRICAL CHARACTERISTICS PER LINE @ 25C Unless Otherwise Specified
PART DEVICE RATED MINIMUM MAXIMUM MAXIMUM MAXIMUM TYPICAL
NUMBER MARKING STAND-OFF BREAKDOWN CLAMPING CLAMPING LEAKAGE CAPACITANCE
(Note 1) VOLTAGE VOLTAGE VOLTAGE VOLTAGE CURRENT
(Note 2) (Fig. 2) (Fig. 2)
@ 1mA @ I = 1A @ I = 5A @V @0V, 1MHz
P P WM
V V V V I C
WM (BR) C C D
VOLTS VOLTS VOLTS VOLTS A pF
PSOT03LC 03L 3.3 4.0 7.0 9.0 125 5
PSOT05LC 05L 5.0 6.0 9.8 11.0 20 5
PSOT08LC 08L 8.0 8.5 13.4 15.0 10 5
PSOT12LC 12L 12.0 13.3 19.0 23.0 1 5
PSOT15LC 15L 15.0 16.7 24.0 28.0 1 5
PSOT24LC 24L 24.0 26.7 43.0 46.0 1 5
PSOT36LC 36L 36.0 40.0 51.0 68.0 1 5
NOTES
1. Positive potential is applied from pin 1 to 2; pin 2 is ground.
2. Do not test or surge from pin 2 to 1. PIV typically greater than 100V for rectifier diode.
www.protekdevices.com
05066.R8 10/12 Page 2
05066