This document contains data proprietary to PUI Audio Inc. Any use or reproduction, in any form, without prior written permission of PUI Audio Inc. is prohibited. 2020, PUI Audio Inc. Data Sheet API-4260-LW150-2-R PUI Audios all-new API-4260-LW150-2-R audio programmable indicator makes adding audio files easier than ever before Connect the API-4260- LW150-2-R to any computer (Window, Linux, or Mac) and simply drag-and- drop mono audio files the same as you would a USB flash drive. A larger 4MB storage size allows for longer files (WAV or MP3) or for sequential playback of multiple files, while the all-new internal DAC allows for 48 kHz sampling rates for true frequency response out to 20 kHz. Features: Easy drag-and-drop file transfer on nearly any computer 150mm lead wires and mounting flanges for easy integration Wide 100 Hz to 20 kHz frequency response Specifications Parameters Values Units Rated Voltage 12 VDC Operating Voltage Range 7 ~ 24 VDC Current Draw at Rated Voltage 350 mA Minimum SPL 10cm (1 kHz tone recorded at 0 dB reference level) 100 dBA Frequency Range (-10 dB) 100 ~ 20,000 Hz Tone or Pulse Rate Repeating - Housing Material ABS - Terminal Material Lead Wires - Weight 27 Grams Acceptable Soldering Methods Hand Solder - RoHS/REACH, FCC Part 15 Class B, - CE EN61000-6-1, Compliances CE EN61000-6-3 Storage Temperature -30 ~ +70 C Operating Temperature -20 ~ +60 C PUI Audio, Inc., 3541 Stop Eight Road, Dayton, OH 45414 Tel: (937) 415-5901 Fax: (937) 415-5925 This document contains data proprietary to PUI Audio Inc. Any use or reproduction, in any form, without prior written permission of PUI Audio Inc. is prohibited. 2020, PUI Audio Inc. Reliability Testing Type of Test Test Specifications 96 hours at 60C followed by 6 hours in normal High Temperature Test room temperature 96 hours at -20C followed by 6 hours in normal room temperature Low Temperature Test 96 hours at +40C with relative humidity at 92% followed by 3 hours in normal room temperature Humidity Test Part is testing according to the below chart for 5 cycles: Temperature Cycle Testing 1.5Hz to 5Hz to 1.5Hz cycles, 15 minutes per Vibration Test cycle. 2 hours in each axis X, Y, and Z. Drop product onto 40mm thick wooden board 10 Drop Test times from a height of 75cm. After each test, the parts SPL shall be no less than 97 dB with 1 kHz sinewave file and 12 VDC applied. Dimensions (Red-wire is positive +, black-wire is negative -) PUI Audio, Inc., 3541 Stop Eight Road, Dayton, OH 45414 Tel: (937) 415-5901 Fax: (937) 415-5925