Dissipative Vinyl Specifications Top Layer Standard Document Meets Requirements of: Conductive ANSI/ESD S20.20 Worksurface Grid Mesh Inner Layer Electrical Properties Typical Values Test Procedures/Method Charge Decay: <0.01sec. FTMS 101C, M 4046 6 9 Rtt Resistance: 1 x 10 to < 1 x 10 ohms ANSI/ESD S4.1 and ESD TR53 .125 6 9 Rtg Resistance: 1 x 10 to < 1 x 10 ohms ANSI/ESD S4.1 and ESD TR53 Dissipative Vinyl Physical Properties Bottom Layer Construction: Heat fused vinyl composite Thickness: 0.125 (3.2mm) Color:* Blue, Grey, Black Blue, Grey, Black Texture:* Light Embossing Hardness: 45 Shore A ASTM-D412 Grounding & Cleaning Tensile Strength: >300 psi ASTM-D412 If the material is used on top of an already properly Tear Strength: >80 lbs/inch ASTM-D624 grounded surface, grounding hardware may not be Elongation: >80% ASTM-D412 necessary. Where no properly grounded surface is Abrasion Resistance: >750 cycles Tabor-CS17 available, grounding hardware is required to provide a path-to-ground. Rtg compliance verification measurements Other Properties must be made as outlined in ESD TR53 with a surface Heat Resistance: Does not melt or burn when coming into contact with hot solder and soldering irons. resistance meter. Chemical Resistance: Resistance to degradation by inorganic acids, organic acids, reducing agents, aliphatic hydrocarbons, mineral oil, aldehydes, and amines See Tech Bulletin TB-7000 for Reztore Surface & Mat Cleaner Application Instructions. Tolerances: Width 0.250 Length 0.250 every 1 linear foot of running material. Thickness 10% Limited Lifetime Warranty: Desco warrants for one year that Statfree matting products will be Matting materials have a tendency to shrink slightly when first unrolled. In applications where length is critical, free of defects in materials and workmanship and will guarantee allow the material to relax for at least 4 hours before cutting to size. Always trim with a sharp knife or razor blade. dissipative/conductive mat properties for the life of the mat. Damage to matting caused by misuse of any kind, including using inappropriate cleaners is not covered by Desco Limited Warranty. *Color and texture may vary between lots and mills. For product listings, Click Here. RoHS 3, REACH, and Conflict Minerals Statement See the Desco Industries RoHS 3, REACH, and Conflict Minerals Statement: