High Frequency Planar Transforms PA08XXNL Series (up to 140W) Power Rating: up to 140W Height: 8.6mm to 9.7mm Max Footprint: 23.4mm x 21.6mm Max Frequency Range: 200kHz to 700kHz Isolation (Primary to Secondary & Core): 1750VDC Electrical Specifications 25C - Operating Temperature -40C to +125C 1 2 Turns Ratio DCR (m MAX) Primary Leakage Maximum 3 Part Schematic Inductance Inductance Height Primary Primary Number Primary A Primary B Secondary Secondary (H MIN) (H MAX) (mm) A B PA0801NL 4T 4T 153 0.45 17.5 17.5 7 8.6 PA0802NL 4T 5T 194 0.45 17.5 20 7 8.6 4T PA0803NL 5T 5T A1 240 0.55 20 20 7 8.6 (1T:1T:1T:1T) PA0804NL * 5T 6T 290 0.60 20 25 7 8.6 PA0805NL 6T 6T 345 0.65 25 25 7 8.6 PA0806NL 4T 4T 153 0.45 17.5 17.5 .875 & .875 8.6 PA0807NL 4T 5T 194 0.45 17.5 20 .875 & .875 8.6 PA0808NL 5T 5T 1T & 1T A2 240 0.55 20 20 .875 & .875 8.6 PA0809NL * 5T 6T 290 0.60 20 25 .875 & .875 8.6 PA0810NL * 6T 6T 345 0.65 25 25 .875 & .875 8.6 PA0811NL 4T 4T 153 0.45 17.5 17.5 1.75 & 1.75 8.6 PA0812NL 4T 5T 194 0.45 17.5 20 1.75 & 1.75 8.6 PA0813NL 5T 5T 2T & 1T A3 240 0.45 20 20 1.75 & 1.75 8.6 PA0814NL * 5T 6T 290 0.50 20 25 1.75 & 1.75 9.7 PA0815NL 6T 6T 345 0.55 25 25 1.75 & 1.75 9.7 Notes: 1. Inductance is measure, where applicable, with both primary windings connected in 4. Basic insulated parts can be made available. Please contact Pulse for availability. series (2 to 5, with 3 and 4 shorted). * Contact Pulse for availability 2. Leakage inductance is measured on winding (2-5) with (3,4) and (7, 8, 9, 10, 11) shorted. 3. 3. The NL suffix indicates an RoHS-compliant part number. Non-NL suffixed parts are not necessarily RoHS compliant, but are electrically and mechanically equivalnt to NL versions. If a part number does not have the NL suffix, but an RoHS compliant version is required, please contact Pulse for availability. 1 power.pulseelectronics.com SPM2007 52 (06/19) High Frequency Planar Transforms PA08XXNL Series (up to 140W) Mechanical PA08XXXNL NL NL Weight ...........................11.0grams NOTE: The above is a universal Tape & Reel ........................180/reel footprint for a component that has all Tray ......................................40/tray 11 pins populated. For a given number, .Inches Dimensions: mm it is only necessary to provide pads Unless otherwise specified, ..010 for the termination shown in the all tolerances are: 0,25 schematics on the next page. Schematics PA08XXXNL NL NL NL NL NL NL NL NL NL NL NL NL NL NL NL Notes: 1. The above transformers have been tested and approved by Pulses IC 2. To determine if the transformer is suitable for your application, it is partners and are cited in the appropriate datasheet or evaluation board necessary to ensure that the temperature rise of the component (ambi- documentation at these companies. To determine which IC and IC com- ent plus temperature rise) does not exceed its operating temperature. panies are matched with the above transformers, please refer to the IC To determine the approximate temperature rise of the transformer, cross reference on the Pulse web page. See the Spy glass transformer refer to the graphs below. matrix on the next page for other winding configurations that can be made available. 2 power.pulseelectronics.com SPM2007 52 (06/19)