SMT Power Inductors Planar - PA1X9XNL Series Height: 7.4mm Footprint: 19.8mm x 19.6mm Max Current Rating: up to 73A Inductance Range: .405H to 6.2H 8 Electrical Specifications 25C - Operating Temperature -40C to +130C 2 Inductance DCR (m) Inductance Saturation Current Heating 5,7 1 Part Irated 3 Irated 0 ADC Current Number (ADC) TYP MAX 25C 100C (H 15%) (H 15%) (A) 2-Turn (Low-Loss) Series PA1294.450NL 0.45 73 .38 .48 0.45 95 80 73 PA1294.650NL 0.63 54 .38 .48 0.65 63 53 73 PA1294.910NL 0.85 39 .38 .48 0.91 46 37 73 PA1294.112NL 1.05 30 .38 .48 1.10 35 30 73 PA1294.132NL 1.25 25 .38 .48 1.30 29 26 73 PA1294.152NL 1.45 21 .38 .48 1.50 24 22 73 2-Turn Series PA1292.450NL * 0.45 52 .78 .98 0.45 95 80 52 PA1292.650NL 0.63 52 .78 .98 0.65 63 53 52 PA1292.910NL * 0.85 39 .78 .98 0.91 46 37 52 PA1292.112NL 1.05 30 .78 .98 1.10 35 30 52 PA1292.132NL 1.25 25 .78 .98 1.30 29 26 52 PA1292.152NL * 1.45 21 .78 .98 1.50 24 22 52 3-Turn Series PA1393.102NL 0.95 42 1.15 1.43 1.0 68 54 42 PA1393.152NL 1.40 36 1.15 1.43 1.5 43 35 42 PA1393.202NL 1.90 25 1.15 1.43 2.0 29 25 42 PA1393.252NL 2.40 20 1.15 1.43 2.5 23 21 42 PA1393.302NL 2.80 15 1.15 1.43 3.0 18 16 42 PA1393.352NL 3.40 12 1.15 1.43 3.5 15 13 42 4-Turn Series PA1494.162NL 1.60 37 1.44 1.80 1.60 55 43 37 PA1494.242NL 2.40 30 1.44 1.80 2.42 35 27 37 PA1494.362NL 3.30 17 1.44 1.80 3.60 20 18 37 PA1494.442NL 4.00 14 1.44 1.80 4.40 16 15 37 PA1494.532NL 4.90 11 1.44 1.80 5.34 13 12 37 PA1494.622NL 5.80 9 1.44 1.80 6.20 11 10 37 1 power.pulseelectronics.com SPM2007 39 (04/19) SMT Power Inductors Planar - PA1X9XNL Series Notes: 1. The rated current as listed is either 85% of the saturation current or the heating cur- total losses (or temperature rise) for a given application, the total copper and core rent, depending on which value is lower. losses should be taken into account. For approximate value of core losses, in a given 2. The saturation current is the current which causes the inductance to drop by 15% at application, use the core loss graph on page 24. the stated ambient temperatures (25C and 100C). This current is determined by 5. Optional Tape & Reel packaging can be ordered by adding a T suffix to the part placing the component in the specified ambient environment and applying a short number (i.e. PA1294.450NL becomes PA1294.450NLT). Pulse complies to industry duration pulse current (to eliminate self-heating effects) to the component. standard tape and reel specification EIA481. 3. The heating current is the DC current which causes the temperature of the part to 6. Meets solderability test per IPC/EIA J-STD-002B using flux type ORL0. increase by approximately 45C. This current is determined by mounting the compo- 7. The NL suffix indicates an RoHS-compliant, but are electrically and mechanically nent on a PCB with .25 wide, 2 oz. equivalent copper traces, and applying the current equivalent to NL versions. If a part number does not have the NL suffix, but an to the device for 30 minutes with no forced air cooling. RoHS compliant version is required, please contact Pulse for availability. 4. In high volt*time applications, additional heating in the component can occur due 8. The temperature of the component (ambient plus temperature rise) must be within to core losses in the inductor which may necessitate derating the current in order to the stated operating temperature range. limit the temperature rise of the component. In order to determine the approximate * Contact Pulse for availability Mechanical PA1X9XNL Weight .....................10.8 grams MAX Tape & Reel ........................250/reel .Inches Dimensions: mm Unless otherwise specified, ..010 all tolerances are: 0,25 Suggested Pad Layouts and Schematics 2 power.pulseelectronics.com SPM2007 39 (04/19)