SMT POWER INDUCTORS Power Beads - PA2607NL and PA2607AHL Series Current Rating: Over 90Apk Inductance Range: 115nH to 300nH Height: 7.5mm and 7.6mm Max Footprint: 10.4mm x 7.9mm Max Halogen Free 7 Electrical Specifications 25C Operating Temperature -40C to +130C 4 1 Inductance Saturation Current Inductance Height 2 3 Part Irated DCR Heating Current (A TYP) 0ADC Irated mm* (ADC) (mW nominal) (A TYP) Number (nH +/- 15%) (nH TYP) (inches) 25C 100C PA2607.121NL 115 115 41 94 80 7.4* PA2607.151NL 150 150 41 72 61 (.291) PA2607.181NL 175 175 41 62 53 0.29 +/- 7% (.XXNL) PA2607.211NL 215 195 41 48 41 41 0.29 +/- 5% (.XXXAHL) 7.3* PA2607.231NL 230 208 37 43 37 PA2607.271NL 270 241 31 37 34 (.287) PA2607.301NL 300 260 27 32 28 NOTES: 1. Inductance measured at 100kHz, 100mVrms. 5. The heating current is the DC current which causes the part temperature to increase by approximately 40C. 2. The rated current as listed is either the saturation current or the heating current depending on which value is lower. 6. In high volt*time applications, additional heating in the component can occur due to core losses in the inductor which may neccessitate derat- 3. The nominal DCR is measured from point a to point b , as shown below ing the current in order to limit the temperature rise of the component. To on the mechanical drawing. The standard part (PA2607.XXXNL) has determine the approximate total losses (or temperature rise) for a given a DCR tolerance of +/-7%. A tighter DCR tolerance of +/-5% is avail- application, the coreloss and temperature rise curves can be used. able by changing the NL suffix to AHL (i.e. PA2607.211NL becomes PA2607.211AHL). 7. Optional Tape & Reel packaging can be ordered by adding a T suf- fix to the part number (i.e. PA2607.211NL becomes PA2607.211NLT). 4. The saturation current is the typical current which causes the induc- Pulse complies to industry standard tape and reel specification EIA481. tance to drop by 20% at the stated ambient temperatures (25C and The tape and reel for this product has a width (W=24mm), pitch 100C). This current is determined by placing the component in the (Po=16.0mm) and depth (Ko=7.6mm). specified ambient environment and applying a short duration pulse current 8. The temperature of the component (ambient plus temperature rise) must (to eliminate self-heating effects) to the component. be within the stated operating temperature range. Mechanical Schematic PA2607.XXXNL PA2607 .XXXNL D/C CTRY * Please note that marking shown is for the PA2607.XXXNL parts. Marking for AHL parts is the same except PA2607.XXXNL is replaced by PA2607.XXXAHL008 0.2 Weight ...........2.4 grams Tape & Reel ........ 400/reel Inches Dimensions: mm Unless otherwise specified, .010 all tolerances are 0,25 pulseelectronics.com P673.H (05/14) 1SMT POWER INDUCTORS Power Beads - PA2607NL and PA2607AHL Series B 0.37 Pulse Worldwide Pulse Europe Pulse China Headquarters Pulse North China Pulse South Asia Pulse North Asia Headquarters Einsteinstrasse 1 B402, Shenzhen Academy of Room 2704/2705 135 Joo Seng Road 3F, No. 198 12220 World Trade Drive D-71083 Herrenberg Aerospace Technology Bldg. Super Ocean Finance Ctr. 03-02 Zhongyuan Road San Diego, CA 92128 Germany 10th Kejinan Road 2067 Yan An Road West PM Industrial Bldg. Zhongli City U.S.A. High-Tech Zone Shanghai 200336 Singapore 368363 Taoyuan County 320 Nanshan District China Taiwan R. O. C. Shenzen, PR China 518057 Tel: 886 3 4356768 Tel: 858 674 8100 Tel: 49 7032 7806 0 Tel: 86 755 33966678 Tel: 86 21 62787060 Tel: 65 6287 8998 Fax: 886 3 4356823 (Pulse) Fax: 858 674 8262 Fax: 49 7032 7806 135 Fax: 86 755 33966700 Fax: 86 2162786973 Fax: 65 6287 8998 Fax: 886 3 4356820 (FRE) Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. Copyright, 2014. Pulse Electronics, Inc. All rights reserved. pulseelectronics.com P673.H (05/14) 2