SMT POWER INDUCTORS Unshielded Drum Core - PF0382NL Series Height: 11.3mm Max Footprint: 13.0mm x 9.4mm Max Current Rating: up to 4.9A Inductance Range: 10H to 1000H RoHS compliant version available on request 7 Electrical Specifications 25C Operating Temperature -40C to +125C 1 3 4 Inductance Inductance Saturation Heating 5,6 2 Part Irated DCR Irated 0ADC Current ISAT Current IDC Number (A) (m MAX) (H TYP) (H 20%) (A) (A) PF0382.103NL 9 4.90 24 10 8.30 4.90 PF0382.153NL 14 4.20 31 15 7.10 4.20 PF0382.223NL 20 3.50 47 22 5.60 3.50 PF0382.333NL 30 3.10 65 33 4.30 3.10 PF0382.473NL 42 2.70 90 47 3.80 2.70 PF0382.683NL 61 1.90 130 68 3.10 1.90 PF0382.104NL 90 1.50 200 100 2.60 1.50 PF0382.154NL 140 1.20 280 150 2.10 1.20 PF0382.224NL 200 1.10 360 220 1.70 1.10 PF0382.334NL 297 0.80 580 330 1.35 0.80 PF0382.474NL 423 0.60 860 470 1.15 0.60 PF0382.684NL 612 0.50 1200 680 1.05 0.50 PF0382.105NL 900 0.20 2000 1000 0.85 0.20 NOTES: 1. Inductance at Irated is a typical inductance value measured when the determined by mounting the component on a typical application PCB and applying the inductor is subjected to the rated current. current to the device for 30 minutes. 2. The rated current as listed is either the saturation current at 25C or 5. Optional Tape & Reel packaging can be ordered by adding a suffix to the part number the heating current, depending on which value is lower. (i.e. PF0382.103NL becomes PF0382.103NLT). Pulse complies to industry standard tape 3. The saturation current Isat is the current which causes the inductance and reel specification EIA481. to drop by 10% (typical) at an ambient temperature of 25C. This 6. TheN suffix indicates an RoHS-compliant part number. Non-NL suffixed parts are not current is determined by placing the component in the specified necessarily RoHS compliant, but are electrically and mechanically equivalent to NL versions. ambient environment and applying a short duration pulse current If a part number does not have theN suffix, but an RoHS compliant version is required, (to eliminate self-heating effects) to the component. please contact Pulse for availability. 4. The heating current IDC is the DC current which causes the tempera- 7. The temperature of the component (ambient plus temperature rise) must be within the ture rise of the part to increase by approximately 40C. This current is stated operating temperature range. Schematic Mechanical ) ** ) + + %& 4* , , , , , ((( - - 4* 4* , , , , , - - - , , 5 Weight 2.5 grams , 5 , Tape & Reel 280/reel , Inches Dimensions: mm .010 Unless otherwise specified, all tolerances are 0,25 3&*4 4* 0. 0 ** , %& USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 54643211 / 2 China 86 755 33966678 Taiwan 886 3 4641811 www.pulseeng.com 19 SPM2007 (11/07)X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for pulse manufacturer: Other Similar products are found below : 5994 5993 PL1746 20379 PL1445T PH9085.011NL P2004NLT PE-0603CD060KTT P0182T PE-0805CD030KTT PE-53363NLT 23Z106SM-T HX5400NL JXD0-4005NL ST6200QNL T3001NL HX2019 HX1148NL PE-65968NL PE-65535NL T1142NLT H6062NL H7019FNL PA2743NL P0438T P0584 P0752.474T P1167.154T STQN1553-45 JG0-0098NL JG0-0025NL J20-0014NL W1911 JX20- 0114NL HFB075100A HX6101NL PA4345.102NLT RO2408NMD P0469NL P0841SNLT PB2134NL ST2-12B42 PE-0805CM331JTT 53119 J3026G01DNL 100B-1001XNL P0849SNL W3012-K T1124NL H5004NL