PF0580NLKIT Pulse

SMT Power Inductors Unshielded Drum Core - PF0580NL Series Height: 3.48mm Max Footprint: 4.7mm Typ x 4.2mm Max Current Rating: up to 3.1A Inductance Range: 1H to 65H 260C reflow peak temperature qualified 6 Electrical Specifications 25C - Operating Temperature -40C to +125C 1 3 4 Inductance Inductance Saturation Current Heating Current 2 5 Part Irated Irated DCR (MAX) 0ADC ISAT IDC Number (H TYP) (A) (m MAX) (H 15%) (A) (A) PF0580.102NL 1.0 3.1 35 1.0 3.6 3.1 PF0580.152NL 1.4 2.7 40 1.5 2.7 2.7 PF0580.182NL * 1.7 2.4 45 1.8 2.4 2.6 PF0580.222NL 2.1 2.2 49 2.2 2.2 2.4 PF0580.272NL * 2.6 2.0 58 2.7 20 2.3 PF0580.332NL 3.1 1.8 63 3.3 1.8 2.25 PF0580.382NL 3.6 1.7 68 3.8 1.7 2.2 PF0580.472NL 4.5 1.6 77 4.7 1.6 2.0 PF0580.562NL 5.3 1.4 90 5.6 1.4 1.9 PF0580.682NL 6.5 1.3 100 6.8 1.3 1.8 PF0580.822NL 7.8 1.2 111 8.2 1.2 1.6 PF0580.103NL 9.5 1.1 132 10 1.1 1.5 PF0580.123NL 11 1.0 160 12 1.0 1.4 PF0580.153NL 14 0.85 197 15 0.85 1.3 PF0580.183NL * 17 0.80 255 18 0.80 1.1 PF0580.223NL 21 0.75 280 22 0.75 1.0 PF0580.273NL * 26 0.65 384 27 0.65 0.90 PF0580.333NL 31 0.58 427 33 0.58 0.85 PF0580.393NL 37 0.55 490 39 0.55 0.80 PF0580.473NL 45 0.50 645 47 0.50 0.70 PF0580.563NL 53 0.46 700 56 0.46 0.67 PF0580.683NL 65 0.41 827 68 0.41 0.62 1 power.pulseelectronics.com SPM2007 02 (02/19) SMT Power Inductors Unshielded Drum Core - PF0580NL Series Mechanical Schematic PF0580.XXXNL Weight .....................6.0 grams Tape & Reel ................160/reel Inches Dimensions: mm Unless otherwise specified, .004 all tolerances are 0,10 Notes from Tables: 1. Inductance at Irated is a typical inductance value measured when the inductor 4. The heating current, IDC, is the DC current required to raise the component is subjected to the rated current. temperature by approximately 40C. The heating current is determined by 2. The rated current listed is the lower of the saturation current 25C or the mounting the component on a typical PCB and applying current for 30 heating current. minutes. 3. The saturation current, Isat, is the current at which the component inductance 5. Optional Tape & Reel packaging can be ordered by adding a T suffix to the drops by 20% (maximum) at an ambient temperature of 25C. This current is part number (i.e. PF0504.681NL becomes PF0504.681NLT). Pulse complies to determined by placing the component in the specified ambient environment industry standard tape and reel specification EIA481. and applying a short duration pulse current (to eliminate self-heating effects) 6. The temperature of the component (ambient plus temperature rise) must be to the component. within the stated operating temperature range. * Contact Pulse for availability Typical Inductance vs Current Characteristics 2 power.pulseelectronics.com SPM2007 02 (02/19)