PF0698.104NLT Pulse

SMT POWER INDUCTORS Unshielded Drum Core - PF0698NL Series All Inductors are RoHS compliant Footprint: 13.0mm x 9.4mm Max Current Rating: up to 4.9A Inductance Range: 10H to 1000H Clip pin termination 260C reflow peak temperature qualified Electrical Specifications 25C Operating Temperature -40C to +125C 2 3 Inductance Saturation Heating 4 1 Part Irated DCR SRF Current Isat Current IDC 0Adc Number (A) (m MAX) (MHz TYP) (H 20%) (A) (A) PF0698.103NL 10 4.90 24 8.3 4.90 19 PF0698.153NL 15 4.50 29 7.1 4.50 15 PF0698.183NL 18 4.20 30 5.8 4.20 13 PF0698.223NL 22 3.50 47 5.6 3.50 12 PF0698.333NL 33 2.80 65 4.3 2.80 9 PF0698.473NL 47 2.45 85 3.8 2.45 7 PF0698.683NL 68 2.00 130 3.1 2.00 6 PF0698.104NL 100 1.60 200 2.6 1.60 4.8 PF0698.154NL 150 1.32 280 2.1 1.32 3.5 PF0698.224NL 220 1.13 360 1.7 1.13 2.8 PF0698.334NL 330 0.95 580 1.35 0.95 2.3 PF0698.474NL 470 0.75 860 1.15 0.75 1.7 PF0698.684NL 680 0.60 1200 1.05 0.60 1.5 PF0698.105NL 1000 0.49 2000 0.85 0.49 1.2 Mechanical Schematic Weight ....................2.5 grams Tape & Reel...............280/reel Inches Dimensions: mm Unless otherwise specified, .004 all tolerances are 0,10 % USA 858 674 8100 UK 44 1483 401 700 France 33 3 84 35 04 04 Singapore 65 6287 8998 Shanghai 86 21 32181071 China 86 769 5538070 Taiwan 886 2 26980228 www.pulseeng.com P641.A (8/05)SMT POWER INDUCTORS Unshielded Drum Core - PF0698NL Series Notes from Tables 1. The rated current as listed is either the saturation current 25C or the 3. The heating current Idc is the dc current which causes the temperature heating current depending on which value is lower. rise of the part to increase by approximately 40C. This current is 2. The saturation current Isat is the current which causes the inductance to determined by mounting the component on a typical application PCB and drop by 10% typical at an ambient temperature of 25C. This current is applying the current to the device for 30 minutes. determined by placing the component in the specified ambient environ- 4. Optional Tape and Reel packaging can be ordered by adding a suffix ment and applying a short duration pulse current (to eliminate self-heating to the part number (i.e. PF0698.103NL becomes PF0698.103NLT). Pulse effects) to the component. complies to industry standard tape and reel specification EIA481. Typical Inductance vs Current Characteristics For More Information: Pulse Worldwide Pulse Pulse North Asia Pulse Pulse Pulse North China Pulse South Asia Northern Europe Room 1002 150 Kampong Ampat 3F-4, No. 81, Sec. 1 Headquarters Southern Europe China Headquarters No. 819 07-01/02 Hsin Tai Wu Road 12220 World Trade Drive 3 Huxley Road Zone Industrielle No. 1 Nanjing West Rd KA Centre Hsi-Chih San Diego, CA 92128 Surrey Research Park F-39270 Industrial District Shanghai Singapore 368324 Taipei Hsien U.S.A. Guildford, Surrey GU2 5RE Orgelet Changan, Dongguan China Taiwan www.pulseeng.com United Kingdom France China TEL: 86 21 32181071 TEL: 65 6287 8998 TEL: 886 2 26980228 TEL: 858 674 8100 TEL: 44 1483 401700 TEL: 33 3 84 35 04 04 TEL: 86 769 5538070 FAX: 86 21 32181396 FAX: 65 6280 0080 FAX: 886 2 26980948 FAX: 858 674 8262 FAX: 44 1483 401701 FAX: 33 3 84 25 46 41 FAX: 86 769 5538870 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. Copyright, 2005. Pulse Engineering, Inc. All right reserved. www.pulseeng.com P641.A (8/05)