SMT POWER INDUCTORS Flat Coils - PG0006NL and PG0138NL Series Height: 6.0mm Max (PG0006) - 4.8mm Max (PG0138) Footprint: 13.4mm x 13.3mm (PG0006) 13.0mm x 12.8mm (PG0138) Current Rating: up to 28.3ADC Inductance Range 0.50H to 5.0H 1 Electrical Specifications 25C Operating Temperature -40C to +130C 2 4 5 6 7,8 Inductance Inductance Saturation Heating Core Loss 3 DCR (m) Part Irated Irated 0ADC Current Current IDC Factor Number (A) (H TYP) TYP MAX (H 20%) ISAT (A) (A) K2 PG0006NL SERIES PG0006.601NL 0.5 23 0.6 0.75 0.60 23 47 69.3 PG0006.102NL 0.9 20 1.4 1.75 1.0 20 31 77.1 PG0006.212NL 1.9 14 3.0 3.6 2.1 14 21 121.3 PG0006.312NL 2.8 12 7.0 7.5 3.1 12 14 119.4 PG0006.422NL 3.8 10 7.0 7.5 4.2 10 14 161.8 PG0006.462NL 4.2 9 9.8 10.4 4.6 9 12 151.9 PG0006.552NL 5 8 11.8 12.4 5.5 8 11 158.9 PG0138NL SERIES PG0138.601NL 0.48 28.3 1.40 1.75 0.60 28.3 30.5 55.3 PG0138.102NL 0.8 21 3.0 3.6 1.0 22.8 21 69.1 PG0138.222NL 1.8 13.5 7.0 7.5 2.2 15.5 13.5 101.3 PG0138.332NL 2.8 11.5 9.8 10.4 3.3 12.2 11.5 130.3 PG0138.472NL 3.7 10.2 11.8 12.4 4.7 10.2 10.5 162.3 PG0138.552NL 4.4 8.2 11.8 12.4 5.5 8.2 10.5 190.0 Mechanical Schematic 5 , 5 , * - ((( 5 Dim. PG0006 PG0138 * ./ ((( 8 9: < 0 (>(: , 5 , A .528/13,40 MAX .504/12,80 MAX B .523/13,28 MAX .512/13,00 MAX C .236/6,00 MAX .193/4,90 MAX D .260/6,60 .005/0,12 .260/6,60 .005/0,12 E .417/10,60 .005/0,12 .425/10,80 .005/0,12 BC .CBB .: C F 3x.146/3,70 .005/0,12 3x.146/3,70 .005/0,12 G .787/20,00 .630/16,00 H .945/24,00 .945/24,00 I .272/6,91 .232/5,90 ) ** ) + + %& ( Inches Dimensions: mm PG0006 PG0138 Unless otherwise specified, Weight ......................3.0 grams .............2.4 grams ) .010 all tolerances are Tape & Reel.................340/reel ................600/reel 0,25 & USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 54643211 / 2 China 86 755 33966678 Taiwan 886 3 4641811 www.pulseeng.com 60 SPM2007 (11/07)SMT POWER INDUCTORS Flat Coils - PG0006NL and PG0138NL Series Notes from Tables 6. Core loss approximation is based on published core data: 1.02 2.29 1. The temperature of the component (ambient plus temperature Core Loss = K1 * (f) * (K2I) PG0006 SERIES rise) must be within the specified operating temperature range. 1.12 2.17 Core Loss = K1a * (f) * (K2I) + PG0138 SERIES 2. Inductance at Irated is a typical inductance value for the 1.25 2.32 K1b * (f) * (K2I) component taken at rated current. Where: Core Loss = in Watts 3. The rated current listed is the lower of the saturation current f = switching frequency in kHz 25C or the heating current. K1= 4.75E-11 4. The saturation current, ISAT, is the current at which the K1a= 4.43E-11 component inductance drops by 10% typical (20% typical for PG0138.XXX) at an ambient temperature of 25C. This current K1b= 1.73E-11 is determined by placing the component in the specified ambient I = delta I across the component in Ampere environment and applying a short duration pulse current (to K2I = one half of the peak to peak flux density eliminate self-heating effects) to the component. across the component in Gauss 5. The heating current, IDC, is the DC current required to raise the 7. Unless otherwise specified, all testing is made at component temperature by approximately 40C. The heating 100kHz, 0.25VAC. current is determined by mounting the component on a typical 8. Optional Tape & Reel packaging can be ordered by adding a PCB and applying current for 30 minutes. The temperature is suffix to the part number (i.e. PG0006.102NL becomes measured by placing the thermocouple on top of the unit under PG0006.102NLT). Pulse complies to industry standard tape and test. Take note that the components performance varies reel specification EIA481. depending on the system condition. It is suggested that the 8. TheN suffix indicates an RoHS-compliant part number. component be tested at the system level, to verify the tempera- Non-NL suffixed parts are not necessarily RoHS compliant, but ture rise of the component during system operation. are electrically and mechanically equivalent to NL versions. If a part number does not have theN suffix, but an RoHS compliant version is required, please contact Pulse for availability. &% % -332 -332 -+B2 -+22 -+02 -/.2 -//2 -2.2 -222 -.*2 -.*2 -B*. -B*. % & % & &% % +** A( .-* +** 2** ( A( A( 3** /** 2** .** /** A( A( A( A( A( .** A( %) & %) & > 72 > 72 USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 54643211 / 2 China 86 755 33966678 Taiwan 886 3 4641811 www.pulseeng.com 61 SPM2007 (11/07) 1 % & % (& 1 % & % (&