Z-BLOCKER Z-200SM In-Line Filter Description The Z-200SM is a small in-line filter designed to expedite the service delivery and improve the performance of digital subscriber line (DSL) services. This model fits all telephone sets, facsimile machines, answering machines, etc. individually or in groups. Our in-line filter design electronically isolates the high-speed DSL and HPN data streams from the voice band plain old telephone service (POTS) equipment. This design effectively blocks the DSL, HPN and other radio Z-200SM In-Line Filter frequencies up to 400 Megahertz (MHz). Applications Features The Z-200SM filters are used with other Isolates telephone equipment impedances from Z-BLOCKER filters distributed throughout the the xDSL and HPN systems subscribers premises to isolate all voice band Attenuate xDSL & HPN signals to phone equipment devices such as corded/cordless tele- equipment to prevent conversion to voice band phones, answering machines, fax machines, signals 56Kb/s and lower rate modems, automatic dialers, Attenuate HPN signals to unbalanced phone recorder connectors and satellite television set-top equipment to prevent radiation into electronic boxes. equipment The Z-200SM-ST in-line DSL filter is one of Minimize voice band interference --- many filters manufactured by Excelsus for sub- transmission, signaling and supervision scriber installed digital services within homes, offices, and hotels. Excelsus is the number one Excellent longitudinal balance Compatible with all major xDSL standards including ADSL Full Rate (ITU-T G.992.1), ADSL G.Lite (ITU-T G.992.2), ADSL2 (ITU- T G.992.3 and .4), ADSL2+ (ITU-T G.992.5 in analog mode), ADSL2++, VDSL (ITU-T G.993.1), VDSL2 also V.90 and Metallic Loop Testing compatible FCC 47 CFR Part 68, IC CS-03, UL 60950, and CSA 22.2 No. 60950 compliant and listed CE Mark certified RoHS and WEEE compliant 1 Networking.PulseElectronics.com EX130.A (03/19)Z-BLOCKER Z-200SM In-Line Filter Series 200 Z-BLOCKER Filter Specifications Line side differential input blocking impedance At 20 kHz >2k At 30 kHz >3k From 5 MHz to 10 MHz >4k From 10 MHz to 400 MHz >2k 1 kHz insertion loss between 600 resistive Single filter <0.7 With 5 filters <0.8 1 kHz/2.8 kHz slope between 600 resistive Single filter <0.1 With 5 filters <0.8 DC resistance in Ohms Tip to Tip, and Ring to Ring <50 Tip to Ring >10M Longitudinal Balance per IEEE method From 200 - 1 kHz >58 dB From 1 kHz - 3 kHz >53 dB Common mode rejection at 40 kHz and 1.1 MHz >45dB Low pass roll off (slope) between 600 Ohm and ADSL Transmission Unit - Remote >24dB Inter-Modulation Distortion First and Second order products >60dB Envelope Delay 300 Hz - 2800 Hz <100s 600 Return Loss into phone side with 600 line termination with ATU-R Single filter SRL Low >25dB ERL >25dB SRL High >24dB +2 bridged filter SRL Low >29dB ERL >22dB SRL High >15dB +4 bridged filter SRL Low >28dB ERL >16dB SRL High >9dB Complex* Return Loss with ATU-R Single filter SRL Low >28dB Single filter ERL >17dB Single filter SRL High >9dB +2 bridged filters SRL Low >20dB ERL >11dB SRL High >6dB +4 bridged filters SRL Low >16dB ERL >8dB SRL High >4dB * 1330 in parallel with (100nfd in series with 348) DC Loop Current - Meets specifications between 20 and 100 milliamps DC Isolates dial pulses and on-hook/off-hook transitions from the digital subscriber line Dimensions: Length 2.0in (50.8mm), Width 1.25in (31.75mm), Height .75in (19.05mm), Cord Length = 3.5in (88.9mm) US Pat. No. 6,212,259 and Taiwan Pat. No. 152847 For More Information: Americas - prodinfonetworkamericas pulseelectronics.com Europe - comms-Apps-Europe pulseelectronics.com Asia - prodinfonetworkapac pulseelectronics.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. Copyright, 201 9. Pulse Electronics, Inc. All rights reserved. 2 Networking.PulseElectronics.com EX130.A (03/19)