1025934 Qorvo

TQS5202 0.1 6 GHz Transfer Switch Applications 802.11b WLAN 802.11g WLAN 802.11a WLAN TX-RX Switching Antenna Diversity Switching Test and Measurement General Purpose Broadband Wireless 12-pin 3x3 mm QFN Package Product Features Functional Block Diagram Pin 1 Reference Mark Integrated TX-RX and Diversity Switch for Dual-band 802.11a/b/g WLAN Systems TX N/C RX Top View 0.1 to 6.0 GHz Frequency Coverage 12 11 10 Control Low Insertion Loss N/C 1 9 N/C High Isolation Positive Control Voltage N/C 2 8 N/C No Supply Voltage Necessary V1 3 7 V2 GaAs pHEMT Technology Leadless 3.0x3.0x0.85 mm Pb-Free SMT Package 4 5 6 A1 N/C A2 Backside Paddle - RF/DC GND General Description Pin Configuration The TQS5202 is a dual-band, double-pole double-throw Pin No. Symbol switch configured for TX-RX and antenna diversity 1, 2, 5, 8, 9, 11 N/C switching applications for the WLAN market and other 3 V1 general purpose transfer switch applications. 4 A1 The TQS5202 exhibits industry-leading insertion loss, 6 A2 isolation and power handling. It requires no fixed supply 7 V2 voltage and operates with a positive control voltage. 10 RX The TQS5202 is manufactured using TriQuints GaAs 12 TX pHEMT process and is packaged in an industry standard Backside Paddle RF/DC GND 3.0x3.0x0.85 mm VQFN-12 Pb-Free package. Ordering Information Part No. Description TQS5202 SP3T Reflective Switch TQS5202-PCB 0.1 - 6.0 GHz Evaluation Board Standard T/R size = 2500 pieces on a 7 reel Datasheet: Rev. D 02-17-14 - 1 of 6 - Disclaimer: Subject to change without notice 2013 TriQuint www.triquint.com TQS5202 0.1 6 GHz Transfer Switch Absolute Maximum Ratings Recommended Operating Conditions Parameter Rating Parameter Min Typ Max Units V High State 2.5 5.0 V Storage Temperature 40 to 150C CTRL RF Input Power, CW, 50, T = 25C +35 dBm Operating Temp. Range 40 +85 C Electrical specifications are measured at specified test Control Voltage Range 5.0 to +5.0 V conditions. Specifications are not guaranteed over all Operation of this device outside the parameter ranges recommended operating conditions. given above may cause permanent damage. Electrical Specifications Test conditions unless otherwise noted: Temp.=+25C, 50 system Parameter Conditions Min Typ Max Units Operational Frequency Range 100 6000 MHz Low 0 0.2 V Control Voltage High 2.5 3.0 5.0 V 0.1 6 GHz 1.5 Insertion Loss 2.3 2.5 GHz 0.8 1.1 dB (5) 4.9 6.0 GHz 0.95 1.35 0.1 6 GHz 20 25 Isolation 2.3 2.5 GHz 25 33 dB (5) 4.9 6.0 GHz 20 28 0.1 6 GHz 12 Return Loss 2.3 2.5 GHz 15 dB (5) 4.9 6.0 GHz 15 2.3 2.5 GHz +33 (1) Input P1dB dBm 4.9 6.0 GHz +29 (2) 2.3 2.5 GHz +31 Input P1dB dBm 4.9 6.0 GHz +27 2.3 2.5 GHz +50 (1)(3) Input IP3 dBm 4.9 6.0 GHz +50 2.3 2.5 GHz 80 (4) Harmonics (2f0) dBc 4.9 6.0 GHz 75 2.3 2.5 GHz 85 (4) Harmonics (3f0) dBc 4.9 6.0 GHz 85 Control Voltage Bias Current V1 or V2 or V3=5 V 50 uA Notes: 1. V =3.0 V / 0 V CTRL 2. V =2.6 V / 0 V CTRL 3. P =+20 dBm/tone, f=1 MHz IN 4. P =+20 dBm IN 5. Using 3pF blocking caps Switch Control Truth Table Digital Control Voltages Control Voltages Signal Path State State Bias Condition Low 0.2V V1 V2 A1-TX A2-TX A1-RX A2-RX High 2.5 V Low High ON OFF OFF ON High Low OFF ON ON OFF All Other States N/A N/A N/A N/A Datasheet: Rev. D 02-17-14 - 2 of 6 - Disclaimer: Subject to change without notice 2013 TriQuint www.triquint.com