856880 Qorvo

856880 1880 MHz SAW Filter Applications General purpose wireless Wireless infrastructure Base Station applications Product Features Functional Block Diagram Top view Usable bandwidth 60 MHz Low Loss 6 1 Gnd Gnd Excellent power handling Single-ended operation No matching required for operation at 50 Input Output 2 5 Small Size: 3.00 x 3.00 x 1.22 mm Ceramic Surface Mount Package (SMP) Hermetically Sealed 3 4 Gnd Gnd RoHS compliant, Pb-free Pb General Description Pin Configuration 856880 is a general purpose Uplink filter for Band 2 This Pin SE Description filter was specifically designed in a 3x3mm hermetic 2 Input package for base station applications and is part of our wide 5 Output portfolio of RF filters in the same package. 1,3,4,6 Case Ground Low insertion loss, coupled with low amplitude variation and high attenuation makes this filter a natural choice for our customers uplink RF filtering needs. No matching components are required, making filter Ordering Information implementation easy. Part No. Description 856880 packaged part 856880-EVB evaluation board Standard T/R size = 5000 units/reel. Data Sheet: Rev B 10/23/12 - 1 of 6 - Disclaimer: Subject to change without notice e 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network 856880 1880 MHz SAW Filter Specifications (1) Electrical Specifications (2) Specified Temperature Range: -30 to +85 C (3) (4) Parameter Conditions Min Typical Max Units Center Frequency - 1880 - MHz Maximum Insertion Loss 1850 1910 MHz - 2.3 3.0 dB Amplitude Variation 1850 1910 MHz - 0.5 1.0 dB p-p Amplitude Variation over any 1850 1910 MHz - 0.2 0.8 dB p-p 5MHz window Phase Ripple 1850 1910 MHz - 12 30 deg p-p Group Delay Variation 1850 1910 MHz - 7.7 25 ns p-p Absolute Group Delay 1850 1910 MHz - 10 30 ns (5) Relative Attenuation 50 110 MHz 35 55.5 - dB 300 400 MHz 35 45.0 - dB 920 965 MHz 35 41.0 - dB 965 1300 MHz 25 40.5 - dB 1300 1635 MHz 25 37.0 - dB 1635 1665 MHz 25 37.7 - dB 1665 1730 MHz 25 34.7 - dB 1730 1790 MHz 10 19.7 - dB 2030 2090 MHz 20 25.2 - dB 2573 2621 MHz 30 34.2 - dB 4074 4162 MHz 20 31.0 - dB 4791 4879 MHz 18 23.0 - dB Input/output VSWR 1850 1910 MHz - 1.75 2:1 - (6) Source Impedance Single-ended - 50 - (6) Load Impedance Single-ended - 50 - Notes: 1. All specifications are based on the TriQuint schematic shown on page 3 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature, unless otherwise noted 5. Relative to maximum insertion loss in passband 6. This is the optimum impedance in order to achieve the performance shown Absolute Maximum Ratings Parameter Rating o Operable Temperature -40 to +85 C o Storage Temperature -40 to +85 C (7) Input Power +22 dBm 7. Input Power is targeted for an applied CW modulated RF in the 1850 1910 MHz band at 55 C for a minimum of 125 hrs Operation of this device outside the parameter ranges given above may cause permanent damage. Data Sheet: Rev B 10/23/12 - 2 of 6 - Disclaimer: Subject to change without notice e 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network