RFMD + TriQuint = Qorvo RF6555 RF6555 2.0V TO 3.6V, 2.4GHz FRONT END MODULE Package: Laminate, 24-Pin, The RF6555 integrates a complete solution in a single Front 5mm x 5mm x 1mm End Module (FEM) for WiFi and ZigBee applications in the Features 2.4GHz to 2.5GHz band. This FEM integrates the PA plus Tx Output Power = 18dBm harmonic filter in the transmit path. The RF6555 also has an Integrated RF Front End Module integrated LNA with bypass mode internally. The RF6555 with Rx Balun, PA, Filter, LNA with provides a single balanced TDD access for Rx and Tx paths Bypass Mode, and DP2T Switch along with two ports on the output for connecting a diversity Single Bidirectional Differential Transceiver Interface. solution or a test port. The device is provided in a 5mm x 5mm Voltage Range = 2.0V to 3.6V x 1mm, 24-pin laminate package. Applications ZigBee 802.15.4 Based Systems for Remote Monitoring and Control Set-top Boxes AA Battery Operation 2.4GHz ISM Band Applications Smart Meters for Energy Management Functional Block Diagram Ordering Information RF6555SB Standard 5-piece sample bag RF6555SQ Standard 25-piece sample bag RF6555SR Standard 100-piece reel RF6555TR13 Standard 2500-piece reel RF6555PCK-410 Fully assembled eval board w/ 5-piece sample bag 1 of 10 Revision DS20150615 Disclaimer: Subject to change without notice 2015 RF Micro Devices, Inc. www.rfmd.com / www.qorvo.com RF6555 RFMD + TriQuint = Qorvo Absolute Maximum Ratings Caution ESD sensitive device. Parameter Rating Unit DC Supply Voltage 5.0 V DC Supply Current 150 mA Operating Case Temperature -40 to +85 C RFMD Green: RoHS status based on EU Directive 2011/65/EU (at time of this Storage Temperature -40 to +150 C document revision), halogen free per IEC 61249-2-21, < 1000ppm each of ESD Human Body Model RF Pins 1000 V antimony trioxide in polymeric materials ESD Human Body Model All Other Pins 500 V and red phosphorus as a flame retardant, and <2% antimony in solder. ESD Charge Device Model All Pins 500 V Exceeding any one or a combination of the Absolute Moisture Sensitivity Level MSL 2 Maximum Rating conditions may cause permanent Maximum Tx Input Power +5 dBm damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce Maximum Rx Input Power +8 dBm device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. Nominal Operating Parameters Specification Parameter Unit Condition Min Typ Max Parameter V 2.0 3.0 3.6 V BATT DC Operating Temperature Range -40 +25 +85 C Z 50 O Off Mode Current 0.05 1.0 A All logic low, Temp = 25C Over Voltage. Storage Temperature -40 +150 C ESD, HBM 1000 V RF pins ESD, HBM 500 V All other pins ESD, CDM 500 V All pins MSL MSL3 Current Sourced through CT Pin 18 mA Voltage Drop from CT Pin to RXP/RXN 0.1 V Tx Path Frequency 2405 2480 MHz Input Return Loss 10 dB Pins 5, 6 (RFM, RFP) 100 differential Output Return Loss 10 dB Gain 22 25 dB 2.7V to 3.6V o 21 dB V =2.0V Temp=25 C CC Gain Flatness -0.8 +0.8 dB Rated Output Power 20 dBm Nominal conditions (V =3.3 to 3.6, All Temp) B 18 dBm Nominal conditions (V =3.0 to 3.3, All Temp) B 16 dBm Nominal conditions (V =2.7, All Temp) B 14 dBm Nominal conditions (V =2.0, All Temp) B Saturated Output Power 22 dBm V =3.6, Temp = 25C B 20 dBm V =3.0, Temp = 25C B Supply Current 110 125 mA P =21dBm 802.15.4 OQPSK (V =3.6, All Temp) O B 105 120 mA P =20dBm 802.15.4 OQPSK (V =3.0, All Temp) O B 70 95 mA P =18dBm 802.15.4 OQPSK (V =3.0, All Temp) O B Revision DS20150615 2 of 10 Disclaimer: Subject to change without notice 2015 RF Micro Devices, Inc. www.rfmd.com / www.qorvo.com