RFFM8800 Wi-Fi Front End Module Product Overview The Qorvo RFFM8800 is an integrated dual band front end module (FEM) designed for Wi-Fi 4 systems. The compact form factor and integrated matching minimizes layout area in the application. Performance is focused on optimizing the 2.4GHz and 5GHz PAs for a voltage range from 3 to 4.8V supply voltage that conserves power consumption while maintaining the highest linear output power. The topology lends itself to applications where 2.4GHz and 30 Pin 3x5 mm Laminate Package 5GHz can be run independently on different antennas. The RFFM8800 integrates a 2.4GHz and 5GHz power amplifier Key Features (PA), regulator, a 5GHz single pole two-throw switch (SP2T), a 2.4GHz single-pole three-throw switch and 2.4GHz and 5GHz 5150-5850MHz & 24122484MHz low noise amplifiers (LNA). 5GHz POUT = +17.5dBm MCS7 HT20 -30dB Dynamic EVM 2.4GHz POUT = +18.5dBm MCS7 HT20 -30dB Dynamic EVM 2.4GHz P = +21.5dBm 11b Spectral Mask Compliance Functional Block Diagram OUT 5GHz 28dB & 2.4GHz 24dB Tx Gain 5GHz 2.5dB & 2.4GHz 2dB Noise Figure 5GHz 14dB & 2.4GHz 12dB Rx Gain Applications Access Points Wireless Routers Residential Gateways Customer Premise Equipment Internet of Things Ordering Information Part Number Description RFFM8800SB Sample bag with 5 pieces RFFM8800SQ Sample bag with 25 pieces RFFM8800SR 7 reel with 100 pieces RFFM8800TR13 13 reel with 2500 pieces RFFM8800PCK-410 Assembled Evaluation Board + 5 pcs Top View RFFM8800 Data Sheet 051419 Subject to change without notice www.qorvo.com 1 of 9 RFFM8800 Wi-Fi Front End Module Absolute Maximum Ratings Parameter Conditions Rating DC Supply Voltage -0.5 to +5.4V Control Voltage PEN5, PEN2, LEN5 & LEN2 -0.5 to +5V -40 to 150C Storage Temperature Into 50 Load for 802.11a-n (No Damage), RF Input Power at TX5 +5 dBm Transmit Mode Into 50 Load for 802.11b-n (No Damage), RF Input Power at TX2 +0 dBm Transmit Mode RF Input Power at ANT (No Damage), Receive LNA On Mode, CW +0 dBm Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Recommended Operating Conditions Parameter Min. Typ. Max. Units 2.412 2.484 GHz Operating Frequency 5.15 5.850 GHz Device Voltage (V & V ) +3 +3.3 +4.8 V CC DD Control Voltage High +2.8 +3.1 +4.6 V Control Voltage - Low 0 +0.2 V T -10 +75 C OPERATING Extended T -40 +85 C OPERATING Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all recommended operating conditions. 5GHz Electrical Specifications Parameter Conditions Min. Typ. Max. Units TRANSMIT (TX5-ANT5) MODE Unless otherwise noted: f=5150-5850MHz, V =3.3V, T=+25C, PEN5=High CC Wi-Fi 4 HT40 Output Power 17.5 dBm MCS7 64QAM 11n Dynamic EVM -31 -30 dB ACP11n Spectral Mask P = +16 dBm, f +/-11 MHz -23 -20 dBc OUT C P = +16 dBm, f +/-20 MHz -30 -28 dBc OUT C P = +16 dBm, f +/-30 MHz -43 -40 dBc OUT C ACP11a Spectral Mask P = +17.5 dBm, f +/-11 MHz -23 -20 dBc OUT C P = +17.5 dBm, f +/-20 MHz -30 -28 dBc OUT C P = +17.5 dBm, f +/-30 MHz -43 -40 dBc OUT C Gain 25.5 28 31 dB TX5 Port Return Loss 5 10 dB ANT Port Return Loss 15 20 dB Quiescent Current RF Off 150 mA Operating Current P = +17.5 dBm 215 260 mA OUT nd 2 Harmonics P = +17.5 dBm, BW = 1MHz -24 -20 dBm/MHz OUT rd 3 Harmonics P = +17.5 dBm, BW = 1MHz -45 -40 dBm/MHz OUT RFFM8800 Data Sheet 051419 Subject to change without notice www.qorvo.com 2 of 9