TGP2107-SM 6 18 GHz 6-Bit Digital Phase Shifter (-Vc) Product Description The Qorvo TGP2107-SM is a packaged 6-bit digital phase shifter, fabricated on Qorvos high performance 0.15 um GaAs pHEMT process It operates over 6 to 18 GHz and provides 360 of phase coverage with a LSB of 5.625. It also achieves a low RMS phase error of 5 with 8 dB of insertion loss over all states. The TGP2107-SM uses negative switch logic, eliminating the need for a reference voltage. That, along with low Air Cavity Ceramic QFN 5x5 mm 32L insertion and a high degree of resolution makes the TGP2107-SM ideally suited for a variety of wideband phased array applications, including commercial and Product Features military radars, satellite-based communication systems and electronic warfare. Frequency Range: 6 to 18 GHz 6-Bit Digital Phase Shifter The device is lead-free and RoHS compliant. 360 Coverage, LSB = 5.625 RMS Phase Error: 5 RMS Amplitude Error: 0.55 dB Insertion Loss: <10 dB Return Loss: >12 dB Input P1dB: >25 dBm Input IP3: >41 dBm Switching Speed: < 40ns Control Voltage: -5/0 V Package Dimensions: 5.0 x 5.0 x 1.45 mm Performance is typical across frequency. Please reference electrical specification table and data plots for more details. Block Diagram Applications Phased Array Antenna Systems 31 30 29 28 Satellite Communication Systems Electronic Warfare 7 18 22 45 180 90 11 5 RF Out RF In Ordering Information 10 11 12 13 15 Part No. Description TGP2107-SM 6-18 GHz 6-Bit Digital Phase Shifter (-Vc) TGP2107-SMEVB TGP2107-SM EVAL BOARD - 1 of 11 - Data Sheet Rev. C August 16, 2021 www.qorvo.com TGP2107-SM 6 18 GHz 6-Bit Digital Phase Shifter (-Vc) Absolute Maximum Ratings Recommended Operating Conditions Parameter Value Parameter Value Control Voltage Control and Reference Voltage 6 V -5/0 V (5N, 5P, 11N, 11P, 22, 45, 90, 180N, 180P) Control Current 15 to +5 mA Temperature Range -40 to +85 C Power Dissipation 0.9 W Electrical specifications are measured at specified test Input Power, CW, 50 , 85C 30 dBm conditions. Specifications are not guaranteed overall operating conditions. Channel Temperature 200 C Mounting Temperature (30 Seconds) 260 C Storage Temperature -55 to 150 C Operation of this device outside the parameter ranges given above may cause permanent damage. These are stress ratings only, and functional operation of the device at these conditions is not implied. Extended application of Absolute Maximum Rating conditions may reduce device reliability. Electrical Specifications Test conditions unless otherwise noted: 25C. Control Voltage (5N, 5P, 11N, 11P, 22, 45, 90, 180N, 180P) = -5/0/ V See Bias Truth Table. Parameter Conditions Min Typical Max Units Operational Frequency Range 6 18 GHz Insertion Loss 6 to 10 dB Input Return Loss >12 dB Output Return Loss >12 dB RMS Phase Error 5 deg RMS Amplitude Error 0.55 dB Input P1dB >25 dBm Input IP3 Spacing = 10 MHz, Pin/Tone = 8 dBm 45 dBm Insertion Loss Temperature Coefficient 0.008 dB/C Bias Truth Table Logic 0 = 5 V, Logic 1 = 0 V Phase Shifter 5P 5N 11P 11N 22 45 90 180P 180N 0 (Reference) 0 1 0 1 0 0 0 0 1 5 1 0 0 1 0 0 0 0 1 11 0 1 1 0 0 0 0 0 1 1 22 0 0 1 1 0 0 0 1 1 45 0 0 1 0 1 0 0 1 1 90 0 0 1 0 0 1 0 1 1 180 0 0 1 0 0 0 1 0 355 1 0 1 0 1 1 1 1 0 - 2 of 11 - Data Sheet Rev. C August 16, 2021 www.qorvo.com