ADVNCED TQQ1030 Band 30 BAW Duplexer Product Description The TQQ1030 is a compact, high-performance duplexer module optimized to meet the stringent OOB attenuation requirements along with excellent insertion loss performance, which is a key enabler to co-banding. The TQQ1030 is built up on Qorvos high performance 8 Pin: 1.8 mm x 1.4 mm x 0.73 mm Package NoDrift Bulk Acoustic Wave (BAW) technology in order to allow meeting stringent OOB attenuation requirements over temperature extremes. Key Features The TQQ1030 uses Qorvos unique Wafer-Level-Packaging Compact form-factor: 1.8 mm x 1.4 mm (WLP) techniques to enable a compact 1.8 mm x 1.4 mm x Insertion loss Enabling true co-banding 0.73 mm Typ footprint. Tx band, 2305 2315 MHz: 1.7 dB Typ Rx band, 2350 2360 MHz: 1.9 dB Typ Functional Block Diagram Best in class close OOB attenuation across Temp High ISM band rejection Single-ended (SE) 50 Ohm receive & transmit ports RoHS compliant, Pb-free Applications LTE handsets, data cards & mobile routers Ordering Information Top View Part Number Description TQQ1030 B30 BAW Duplexer TQQ1030-EVB Evaluation Board Standard T/R size = 2500 pieces on a 7 reel. TQQ1030 Data Sheet Rev J www.qorvo.com 1 of 11 Subject to change without notice TQQ1030 Band 30 BAW Duplexer Absolute Maximum Ratings Parameter Rating Storage Temperature 40 to +85 C RF Input Power applied to pin 3 (CW, 50 , 55 C, 5000hrs) +30 dBm RF Input Power applied to pin 3 (Instantaneous) +36 dBm Operation of this device outside the parameter ranges given above may cause permanent damage. Recommended Operating Conditions Parameter Min. Typ. Max. Unit TCASE -20 +90 C The duplexer will function over the recommended range without degradation in reliability or permanent change in performance. TQQ1030 Data Sheet Rev J Subject to change without notice www.qorvo.com 2 of 11