854916 140 MHz SAW Filter Applications General Purpose For IF applications Product Features Functional Block Diagram Top view Typical 3 dB bandwidth of 10.59 MHz Low loss 10 9 8 7 High Attenuation 11 6 Single-ended operation Ceramic Surface Mount Package (SMP) 12 5 Small Size 1 2 3 4 Dimensions: 13.30 x 6.50 x 1.75mm Hermetic RoHS compliant, Pb-free General Description Pin Configuration The 854916 is a high-performance IF SAW filter with a Pin SE Description center frequency of 70 MHz and a 3.0 dB bandwidth of 11 Input 16.5 MHz. 5 Output 12 Input Return It features low loss with excellent attenuation, and is 6 Output Return designed to be used with a single ended input and output. 1,4,7,10 Floating 2,3,8,9 Case Ground The device is RoHS compliant and Pb-free. Ordering Information Part No. Description 854916 packaged part 854916-EVB evaluation board Standard T/R size = 2000 units/reel. Data Sheet: Rev C 03/06/12 - 1 of 6 - Disclaimer: Subject to change without notice e 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network 854916 140 MHz SAW Filter Specifications (1) Electrical Specifications (2) Specified Temperature Range: +25 C (3) (4) Parameter Conditions Min Typical Max Units Center Frequency 136.9 140 140.4 MHz Insertion Loss At Center Frequency - 8.3 10 dB (5) 1 dB Bandwidth 9.1 9.6 - MHz (5) 3 dB Bandwidth 10 10.59 - MHz (5) 35 dB Bandwidth - 13.9 14 MHz Passband Ripple 136 144 MHz - 0.4 1.0 dB p-p o Phase Linearity 136 144 MHz - 9.0 15 p-p Group Delay Variation 136 144 MHz - 50 120 ns p-p Absolute Delay Variation 136 144 MHz - 1.062 - s Temperature Coefficient - -94 - ppm/ C (6) Source Impedance single-ended - 50 - (6) Load Impedance single-ended - 50 - Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3 2. All specifications are tested at room temperature only 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Relative to Insertion loss at center frequency 6. This is the optimum impedance in order to achieve the performance shown Absolute Maximum Ratings Parameter Rating (6) o Operating Temperature -40 to +85 C o Storage Temperature -40 to +85 C Input Power (at +55 C for 10K hours max) +20dBm 7. Device may operate over this range with degraded Electrical Specifications Operation of this device outside the parameter ranges given above may cause permanent damage. Data Sheet: Rev C 03/06/12 - 2 of 6 - Disclaimer: Subject to change without notice e 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network