856074-EVB Qorvo

856074 140 MHz SAW Filter Applications General Purpose For IF applications Product Features Functional Block Diagram Top view Typical 3dB Bandwidth of 57.0 MHz Low loss Gnd Gnd Gnd High attenuation 8 7 6 Single-ended operation Input 9 5 Output return Replaces P/N 851947 (BW 3dB=56 MHz) Ceramic Surface Mount Package (SMP) Small Size Input return 10 4 Output Dimensions: 9.0 x 7.0 x 1.5mm 1 2 3 Hermetically Sealed Gnd Gnd Gnd RoHS compliant, Pb-free Pb General Description Pin Configuration The 856074 is a high-performance IF SAW filter with a Pin SE Description center frequency of 140 MHz and a 3 dB bandwidth of 57.0 9 Input MHz. 10 Input Return 4 Output It features low loss with excellent attenuation, and is 5 Output Return designed to be used with a single ended input and output. 1,2,3,6,7,8 Case Ground The device is RoHS compliant and Pb-free. Ordering Information Part No. Description 856074 packaged part 856074-EVB evaluation board Standard T/R size = 2000 units/reel. Data Sheet: Rev C 03/14/11 - 1 of 6 - Disclaimer: Subject to change without notice e 2011 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network 856074 140 MHz SAW Filter Specifications (1) Electrical Specifications (2) Specified Temperature Range: 0 to +70 C (3) (4) Parameter Conditions Min Typical Max Units Center Frequency - 140 - MHz Minimum Insertion Loss - 18.65 19.5 dB (5) Lower 1dB Band Edge - 112.7 115.75 MHz (5) Upper 1dB Band Edge 164.25 166.1 - MHz (5) Lower 3dB Band Edge - 111.4 112.8 MHz (5) Upper 3dB Band Edge 167.2 168.4 - MHz (5) Lower 40dB Band Edge 102.2 106.3 - MHz (5) Upper 40dB Band Edge - 176.4 177.8 MHz Amplitude Variation 115.75 164.25 MHz - 0.60 1.15 dB p-p Phase Linearity 115.75 164.25 MHz - 4.07 7.75 deg p-p Group Delay Variation 115.75 164.25 MHz - 31 60 ns p-p Group Delay 115.75 164.25 MHz - 0.531 - s (5) Relative Attenuation 10 27.5 MHz 49 58 - dB 27.5 102 MHz 39 42 - dB 178 252.5 MHz 37 42 - dB 252.5 300 MHz 36 44 - dB (6) Source Impedance (single-ended) - 50 - (6) Load Impedance (single-ended) - 50 - Temperature Coefficient of Frequency - -74 - ppm/ C Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Relative to minimum insertion loss 6. This is the optimum impedance in order to achieve the performance shown Absolute Maximum Ratings Parameter Rating o Operating Temperature 0 to +70 C o Storage Temperature -40 to +85 C Operation of this device outside the parameter ranges given above may cause permanent damage. Data Sheet: Rev C 03/14/11 - 2 of 6 - Disclaimer: Subject to change without notice e 2011 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network