856532-EVB Qorvo

856532 1950 MHz SAW Bandpass Filter RFMD + TriQuint = Qorvo Applications LTE Band 1 UL Filter for Infrastructure 3G, 4G Multi-Standard Wireless Repeaters General Purpose Wireless Base Stations SMP-12, 3.00 x 3.00 x 1.22 mm Product Features Functional Block Diagram 60 MHz Bandwidth Low Loss 6 1 Gnd Gnd High Attenuation Single-ended Operation No impedance matching required for operation at Input Output 2 5 50 Small Size: 3.00 x 3.00 x 1.22 mm Ceramic Surface Mount Package (SMP) 3 4 Gnd Gnd Hermetically Sealed RoHS Compliant, Pb-Free Pb General Description Pin Configuration Single Ended 856532 is a Band 1 Uplink filter for general purpose Pin No. Label wireless applications. This filter was specifically 2 Input designed in a 3x3mm hermetic package for base station 5 Output applications and is part of our wide portfolio of RF filters 1,3, 4 6 Ground in the same package. 856532 has low insertion loss, coupled with high attenuation and good power handling, making this filter a natural choice for our customers uplink RF filtering needs and other general purpose applications. 856532 require no matching components, making filter implementation easy. Ordering Information Part No. Description 856532 Packaged part 856532-EVB Evaluation board Standard T/R size = 5000 units/reel Data Sheet: Rev E 09-02-15 Disclaimer: Subject to change without notice - 1 of 6 - 2015 TriQuint Semiconductor, Inc. www.triquint.com /w w w .q orvo.com 856532 1950 MHz SAW Bandpass Filter RFMD + TriQuint = Qorvo Absolute Maximum Ratings Notes: Parameter Rating 1. Operation of this device outside the parameter ranges given (1) Storage Temperature 40 to +85C may cause permanent damage. (2) 2. Specifications are not guaranteed over all operating conditions. Operable Temperature 30 to +105C 3. Input Power is targeted for an applied CW modulated RF (3) signal at 105C for 10 years. RF Input Power +10 dBm (1) Electrical Specifications (2) Test conditions unless otherwise noted: Temp= 30C to +85C (3) (4) Parameter Conditions Min T yp Max Units Center Frequency - 1950 - MHz Maximum Insertion Loss 19201980MHz - 2.5 3.0 dB (5) Amplitude Ripple - 0.7 1.5 dB p-p 101000MHz 25 31.7 10001880MHz 20 31.8 (6) Absolute Attenuation 21102170MHz 40 43.6 - dB 21703800MHz 25 29.1 38005000MHz 18 22.5 Input/Output Return Loss 19201980MHz 8 9.6 - dB (2) Test conditions unless otherwise noted: Temp= 40C to +85C (3) (4) Parameter Conditions Min T yp Max Units Maximum Insertion Loss 19201980MHz 2.5 3.2 dB (5) Amplitude Ripple 19201980MHz 0.7 1.5 dB p-p 101000MHz 25 31.7 10001880MHz 20 31.8 21102170MHz 40 43.6 (6) Absolute Attenuation - dB 21703800MHz 25 29.1 38005000MHz 18 22.5 (8) 38005000MHz at +105C 17 22.5 19201980MHz 8 9.6 Input/Output Return Loss - dB (8) 19201980MHz at +105C 7 8.6 (7) Source Impedance single-ended - 50 - (7) Load Impedance single-ended - 50 - Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3. 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature. 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances. 4. Typical values are based on average measurements at room temperature. 5. Evaluated as peak-to-adjacent valley ripple. 6. Relative to zero dB. 7. This is the optimum impedance in order to achieve the performance shown. 8. Extended temperature operation: the filter can be operated up to +105C with de-rated specification as noted. Data Sheet: Rev E 09-02-15 Disclaimer: Subject to change without notice - 2 of 6 - 2015 TriQuint Semiconductor, Inc. www.triquint.com /w w w .q orvo.com