856882 358.4 MHz SAW Filter Applications General Purpose Wireless Wireless Infrastructure 3G, 4G, Multistandard Functional Block Diagram Bal/Bal Functional Block Diagram Bal/SE Top view Top view Gnd Gnd Gnd Gnd Gnd Gnd 9 8 9 7 8 7 Output - Input + 10 6 Gnd Input + 10 6 Gnd Gnd 11 5 Gnd 11 5 Gnd 12 Output + Input - 4 Input - 12 Output 4 1 2 3 1 2 3 Gnd Gnd Gnd Gnd Gnd Gnd Product Features Pin Configuration Pin Bal/Bal Description Usable bandwidth 39.6 MHz 10 Input + 12 Input - Low loss 4 Output + High attenuation 6 Output - Low EVM 1,2,3,5, 7, 8, 9, 11 Ground Balanced-Balanced or Balanced-Single ended operation Ceramic Surface Mount Package (SMP) Pin Bal/SE Description Small Size: 7.01 x 5.51 x 1.70 mm 10 Input + 12 Input - Excellent power handling 4 Output Hermetic RoHS compliant, Pb-free 1,2,3,5,6, 7, 8, 9, 11 Ground General Description Ordering Information The 856882 is a high performance IF SAW filter developed Part No. Description for 4G and Multistandard infrastructure applications. 856882 packaged part 856882-EVB evaluation board It features low loss with excellent attenuation, and is designed Standard T/R size = 3000 units/reel. to be used with multiple impedance values and configurations. The filter is developed for excellent in-band characteristics in Please specify the evaluation board impedance: order to minimize system bit-error rates. 1. Balanced 200 input, Balance 200 output. 2. Balanced 200 input, Single-ended 50 output. This device is RoHS compliant and Pb-free. 3. Balanced 100 input, Balance 100 output. Data Sheet: Rev - 7/26/11 - 1 of 8 - Disclaimer: Subject to change without notice e 2011 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network 856882 358.4 MHz SAW Filter Specifications (1, 2) Electrical Specifications (3) Specified Temperature Range: -33 to +85 C (4) (5) Parameter Conditions Min Typical Max Units Center Frequency - 358.4 - MHz Insertion Loss At 358.4 MHz - 9.5 11.5 dB (6) Amplitude Variation 338.6 378.2 MHz - 0.35 1.0 dB p-p Absolute Group Delay At 358.4 MHz - 0.43 0.5 s (6) Group Delay Variation 338.6 378.2 MHz - 21 50 ns p-p Time side-lobe response attenuation (1.0 500 s) 40 45 - dB IIP3 Tones 5 MHZ separated power 45 50 - dBm > 5dBm per tone (7) EVM - 1.3 3 % (8) Absolute Attenuation 10.0 253.4 MHz 55 61 - dB 253.4 270.0 MHz 53 56 - dB 270.0 294.4 MHz 55 58 - dB 294.4 312.4 MHz 40 53 - dB 312.4 326.4 MHz 25 44 - dB 388.4 404.4 MHz 30 37 - dB 404.4 422.4 MHz 40 49 - dB 422.4 463.4 MHz 45 52 - dB 463.4 660.0 MHz 55 66 - dB 660.0 780.0 MHz 35 38 - dB 780.0 3000 MHz 55 62 - dB Input/Output Return Loss 338.6 378.2 MHz 10 12 - dB (9) Source/Load Impedance - 200, 100, 50 - Notes: 1. All specifications are based on the TriQuint schematics for the different impedances shown on page 3, 4 & 5. 2. An external impedance matching network with 2% tolerance will be necessary to achieve the proposed specifications. 3. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature. 4. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances. 5. Typical values are based on average measurements at room temperature. 6. These Variations are defined as the difference between the lowest loss and the highest loss within the defined frequency points. 7. Measured with an RRC filtered QPSK modulated signal with a BW of 3.84 MHz placed anywhere within 338.6 to 378.2 MHz. 8. Relative to insertion loss at center frequency. 9. See the impedance options in the ordering information section on page 1. Data Sheet: Rev - 7/26/11 - 2 of 8 - Disclaimer: Subject to change without notice e 2011 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network