857143 Qorvo

857143 1176.45 MHz SAW Filter Applications For GPS applications Product Features Functional Block Diagram Top view Ultra-Low Loss Gnd Usable bandwidth 20.46 MHz Single-ended operation Ceramic chip-scale Package (CSP) Output 5 4 Small Size: 1.40 x 1.20 x 0.46 mm Hermetically Sealed Input 1 RoHS compliant, Pb-free 2 3 Gnd Gnd General Description Pin Configuration 857143 is specifically designed for GPS applications. Pin Balanced Description 1 Input 857143 uses advanced and inexpensive packaging 4 Output techniques to achieve an extremely small 1.40 x 1.20 x 0.46 2,3,5 Ground mm hermetically sealed package. Ordering Information Part No. Description 857143 packaged part 857143-EVB evaluation board Standard T/R size = 10000 units/reel. Preliminary Data Sheet: Rev - 7/19/12 - 1 of 6 - Disclaimer: Subject to change without notice e 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network 857143 1176.45 MHz SAW Filter Specifications (1) Electrical Specifications (2) Specified Temperature Range: -55 to +85 C (3) (4) Parameter Conditions Min Typical Max Units Center Frequency - 1176.45 - MHz Maximum Insertion Loss 1175.25 1177.65 MHz - 0.5 0.9 dB Lower 2.0dB Bandedge - 1159.33 1166.22 MHZ Upper 2.0dB Bandedge 1186.68 1197.57 - MHZ Lower 21dB Bandedge 1126.45 1144.55 - MHZ Upper 21dB Bandedge - 1208.29 1226.45 MHZ Amplitude Variation 1175.25 1177.65 MHz - 0.03 0.2 dB p-p (5) Relative Attenuation 414 550 MHz 20 24.0 - dB 1100 1126.45 MHz 21 24.3 - dB 1226.45 1250 MHz 21 26.7 - dB 1310 1770 MHz 20 21.1 - dB Input Return Loss 1175.25 1177.65 MHz 15 25.8 - dB Output Return Loss 1175.25 1177.65 MHz 15 27.1 - dB (6) Source Impedance (Single-ended) - 50 - (6) Load Impedance (Single-ended) - 50 - Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Relative to zero dB. 6. This is the optimum impedance in order to achieve the performance shown Absolute Maximum Ratings Parameter Rating (7) o Operating Temperature -55 to +85 C o Storage Temperature -55to +85 C (8) Input Power +20 dBm 7. Device may operate over this range with degraded Electrical Specifications 8. Device is measured for equivalent 10K hours +85 C CW Signal Operation of this device outside the parameter ranges given above may cause permanent damage. Preliminary Data Sheet: Rev - 7/19/12 - 2 of 6 - Disclaimer: Subject to change without notice e 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network